Search Results for ‘holley’

I have a 1978 CJ7 with the 304 V8. It has an Edelbrock 4 barrel carb and it has always taken a LONG time to crank, like it was fuel starved. Over a year or so, I replaced the fuel pump and all of the fuel lines going back to the tank. I found a leak in the fuel line back near the tank and I...

So I'm thinking about buying a 360. Runs and sounds great, but after 5-10 mins of idling it will shut off abruptly, no chugging or clunking, just shuts off. He just put a brand new Holley carb and intake on it, checked the timing and replaced the distributor with the same results. It'll start...

Hey guys, currently rebuilding the holley 1850 that is in my jeep. Got it all apart and have a few questions. Specs on jeep: 304 V8 long tubes dual exhaust Holley 1850 carb 4 speed (if that matters) Truck sat for a decade and I def found some gunk in the carb so cleaning it. Question 1: Has...

Hi Folks, First time posting. I have a 1979 CJ5 with a Holley Truck Avenger 470 carb on an AMC 304 motor . This weekend I uprated the brakes from the standard original master cylinder to a Navajo dual diaphragm brake booster and new cylinder. Tested the system, after bleeding the brakes and...

Let me first start off by saying the truck avenger has been very reliable and I am not bashing it in any way. I only drive my jeep on the weekends, so it usually sits for 5 to 6 days at a time between starts. Over the past three weekends, the engine has done the exact thing. I get in the jeep...

im running a pretty stock 88 yj with the 4.2. I nutter bypassed it and swapped the carter carb for a rebuilt Holley 2 barrel... i believe it is a 350 cfm but cant quite remember.. anyways with the carter i was getting between 13-14 and after the swap and bypass ive been getting more in the 10...

last week i swapped the carter out for a rebuilt Holley carb and also nuttered the jeep. started right up and ran perfect but when i drove it when it was cold i couldn't press the throttle much or else it would start to run choppy and lose all power and almost kill its self. when it warms up it...

So my grandfather likes to frequent garage sales, and long story short I ended up with this carb. Not sure what it is, it certainly appears like a Weber, but has Holley on it. I have little to no knowledge of the Weber. I'm going to be sticking a diesel in my Jeep, so I won't have any use for...

Guys, I purchased a Holley 390 cfm carbuerator to top off my clifford intake and 4.0 head swap. There is one little nipple on there that I am not sure what to do with. I have provided a pic below with the nipple in question. The instructions say it goes to the air cleaner but just how do I get...

First... thanks for all the great help in the past. So... I have a 4.2L block & 4.0L head, GM HEI dizzi, TH700-R trans, Weber 32/36 DGEV carb. I previously had a MC 2100 (which ran very well) but swapped it for the Weber which has always been a witch (has to have perfect timing, perfect...

I have lots of questions............. Let's say a person has a chevy 350 and needs a carb for it. How does carb size affect performance? For example, what would be the difference in a 600cfm and a 750cfm? Gas mileage? HP? Isn't there a limit to how much gas you can pour into an engine...

Hello, I have an '89 Jeep Wrangler YJ and it has the 258 inline 6 in it. I have an eidelbrock intake manifold with a 650 Holley that has been on it since I bought it. It is a toy for me and I wanted to put a 500 CFM or lower on it for gas. It is dumping way to much gas in it. I was looking...