Search Results for ‘header’

I’ve got an 89 YJ with the 4.2l engine and have searched for a tuned or otherwise header for that motor and can’t seem to find one. Looks like a few companies used to make them but not anymore. Anybody got a place I might look.

Sorry, realized I was in TJ forum and can’t delete this post. I’ve got an 89 YJ with the 4.2l engine and have searched for a tuned or otherwise header for that motor and can’t seem to find one. Looks like a few companies used to make them but not anymore. Anybody got a place I might look.

So my exhaust manifold is cracked, surprise, surprise... :| I've got a new one on order that'll be here in about three days. I've got the chilton manual and it really doesn't seem that difficult to fix but I'm no professional.. I was hoping someone could point me towards a good write up of a...

I have a 97' TJ sport 6cy. So where the downpipes meet the main pipe in the header is cracked in like 4 spots. I went to my mechanic and he recommended furnace cement. I applied it and left it to dry over night(it's December in SE PA, not too warm) wasn't fully dry and I drove it. Drove it...

So im looking to put a header on my 4.2 after I have the rebuild done on it. Does anyone out there have any ideas or suggestions on what I should go with? Ive only had my jeep addiction for about a year now so im still learning about offroading and the modding that you can do. Any tips in...

Hey guys a few weeks ago my exhaust got really loud and upon further inspection I found I had a cracked exhaust manifold. It is the two piece style so it is a little rarer than the one piece style but evidently it happens. Sa as a result I decided to be a little cheap (wait this become...

I have a 2000 Wrangler, I kinda have been pondering the idea of putting a header on my 4.0L it is a stocker motor. Im getting ready to replace my lifters. Thought about shaving my head too while its off. Maybe porting it also. I plan on lifting it at some point, so Im covering my bases now I...

You asked for it. So here it is! Power increases comparable to some of our forced induction competitors! JEEP Wranglers equipped with the 3.8l V6 are anything but powerful, RIPP has been on an on going quest to turn that around. If your looking for a significant improvement in performance...

hi guys, planning on doing this in the spring when the warmer weather gets here. have a 98 TJ 4.0 got the banks revolver header got a late model air intake question is, do i use the gasket that came with the banks, or get a 99+ gasket. I noticed they're slightly different.

I'm needing to get my oil pan off. The Haynes manual says to remove exhaust pipe and Tranny cooler lines. From looking at those rear bolts near the driver, I see why. Everything is going smoothly, I get the bolts off of the flange, but can't get the thing separated from the header. I can see...

Hey guys, I've got a pretty good crack in my exhaust manifold. I've done a few searches and it seems like most are recommending APN, Banks, or an e-bay no name. I don't want to spend the money on the Banks header, as I don't need anymore power, I'd just like to have some gas mileage back. Any...

I am looking at possibly going to a set of headers that run outside the frame rails. My suspension and drive train have made space a little tight everywhere else. Does anyone run these? What kind? Any issues?

Which year(s) will the header interchange on a yj i have a 94 4.0L h.o with an AX-15 & the header is almost unrepairable so im gonna go to the scrapyard & pull one i heard that they will fit from 88-02 is this correct ? if not what are some of the differences ? I had done a headgasket/Head...

I have an 06 LJ Rubicon I bought about 16 months ago. I have been getting very low gas milage compared to past jeeps I have had. I bought it stock and it got about 13-14 mpg and since put 33's on it and is getting about 12 mpg. I know jeeps are terrible on gas but that has seemed low to me...

Just picked up my second cheap TJ. This one is a 1998 4.0L It has one heck of an exhaust leak at/near the header. I figured it was the typical cracked manifold so common on these, but when I crawled underneath, I got a little confused. Is this a stock header? Looks like a steel tube afermarket...

Ive got a banks Monster Exhaust cat back on my 4.0L TJ right now. Sounds really good and I like it, but I want to add some more to the exhaust. I was thinking about a header and a hi-flow cat. Woud these mods get the extra sound Im looking for and possibly performance? Are there any other...

Anyone have an easy fix for the header latch. one of the metal pins that holds it together came out. i looked around and did not see any replacement parts on line and before i try to fix it, i thought i would see if anyone has done this before and how. its the passenger side, outside pin. i...

Need Headers for a 4.0 I6 TJ Engine. Can anyone tell me a good place to get them and part numbers??? All help greatly appreciated!!!!