Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 45 Results
  1. Jeep CJ Forum
    The starter solenoid went bad in my CJ5 so I swapped it out with a Master Pro replacement part (Part#2SS3) I got from O'Reilly and now it's making some strange grinding/clanking sound while running. Looking for some advice on what could be some possible causes as I only changed the solenoid and...
  2. JK Wrangler Technical Forum
    I have a 2011 JKU Sahara. On mornings below 40 degrees, on my first attempt to start, I hear the starter kick on and it is followed by a horrible grinding sound. Sounds like the bendix isn't engaging the flywheel. it will start right up on the second try and will start fine the rest of the day...
  3. YJ Wrangler Technical Forum
    I have a 1995 Jeep YJ. Recently whenever I make a sharp turn im 4 wheel drive , whether it is right or left it makes a grinding/ squeaking noise. It doesn't matter how fast I am going, 10 km/h or 50 km/h it does it every time. In both forward and reverse. When I am going slow with my wheel...
  4. XJ Cherokee Technical Forum
    so it snowed the other day.......i was gassin it a lil bit to see how it reacted in 2wd. ....when my rear wheels started to spin out i heard a grinding like noise from the front end. now i never heard it before and it did it a few more times when i was driving it at the time. put it in 4wd and...
  5. WK Grand Cherokee & XK Commander Forum
    Had a grinding noise in the front for a while now and can't figure it out. It only happens in turns (more than one wheel turn) and while I'm accelerating. I have a sneaking suspicion is somehow related to my diff bushing since it only happens under acceleration and the front diff bushing doesn't...
  6. YJ Wrangler Technical Forum
    While driving, suddenly out of nowhere there came a bad grinding noise from the rear. It grinds constantly. Does not stop when braking/accelerating/slowing or speeding up. It is constant. Does anybody have an idea as to what this is? :confused: This is for a 1993 Jeep Wrangler
  7. XJ Cherokee Technical Forum
    I installed a 3.5 RE superflex lift on my 01 xj a few weeks ago so after I was done I test drove it and noticed minimal vibs but have grinding noise coming from under the jeep usually around deceleration.. So I just had an Advanced Adapters SYE installed and a rugged ridge rear driveshaft...
  8. JK Wrangler Technical Forum
    Hey guys I've had this huge problem with my Jeep lately. The ABS light came on as I was driving around and when I'd press my break the pedal felt locked and it grined but it did break. Later the light would turn off and everything was fine. Ok now the light is always on and the only time it...
  9. ZJ Grand Cherokee Forum
    I've done alot of research on forums and different websites but no one really has had this issue. I have a 1996 ZJ 4.0l. 180k on motor and very stock, currently fixing it before i dump money into lifts or the stuff i want to do. Anyways, as of lately I have been hearing (feeling) a grinding...
  10. TJ Wrangler Technical Forum
    I have a 1997 Wrangler 2.5 that is making a gear noise from what I can tell up front. This only happens when I am turning right and do not have the accelerator pressed. If the clutch is in it REALLY makes the noise. It is almost like the axel is slipping somehow and by having the accelerator...
  11. XJ Cherokee Technical Forum
    I just started having a problem the other day while pulling out of a parallel parking spot. There was a steady grinding noise, even when I started driving straight. I put the jeep in reverse, and still there was a grinding noise. I let it sit for a little and then continued to drive and the...
  12. ZJ Grand Cherokee Forum
    Hi fellow zj owners, i have a 95 I6 4.0 with about 202k on her. a few months ago i started noticing a grinding noise when every time i accelerated and it would get louder as i got faster. When i let go of the gas it seems like the grinding is louder and more noticeable than accelerating. It...
  13. WK Grand Cherokee & XK Commander Forum
    Ive seen a few threads on this issue but felt it necessary to post this specifically to my vehicle. The front end of my 2006 jeep gc 5.7L V8 has a binding/grinding issue during tight turns. I've just replaced the front right wheel bearing and still the problem persists. The problem feels as...
  14. Jeep MK Compass & Patriot Forum
    This is my first post to the forum so I'm really hoping you guys can help me out. I've had my 08 jeep compass sport for 4 months now, and I love this car. I seem to be having nothing but issues with it though. The current issue is.... When I'm driving down be road, coming up to a stop light or...
  15. TJ Wrangler Technical Forum
    A couple of days ago I took my Jeep out to this vacant lot down the street. When it rains there are big puddles and stuff and living in the city it's nice to be able to get a little bit of mudding in. So I had it 4hi when I did this, and on the way home I put it back into 2hi, where I heard a...
  16. YJ Wrangler Technical Forum
    I just replaced the MC and the slave. Put the tranny back in and the transfer. Got everything hooked up bleed it some. Now when running it is hard to go into gear and if you try to put in 5th or reverse it grinds. Is this still air in the slave or could I have hooked something back up wrong? If...
  17. JK Wrangler Technical Forum
    Yesterday when I was wheeling I heard a grinding noise (randomly while in 4H), sounded like the exact sound you get when shifting into 4L with speed or slowly. However closer inspection showed the paint on the 'steering column?' Right under the bumper had been stripped of the stock black paint...
  18. TJ Wrangler Technical Forum
    So my rear drums were worn to nothing so i replaced my rear brakes, springs, e brake adjuster, shoes and drums...and theyre grinding pretty good when i brake...both sides grind.I now have 100 miles on them... Anyone have any advice?? :confused:
  19. KJ Liberty Forum
    When I put my Liberty in 4high, it grinds/clicks a little. Then last night, in 2wd- it started making the same sound. I tried to move from 2wd-4wd and it got worse...then I put it in 4 low...and almost couldn't move! Other forums say drive line or CV Joint. I thought CV Joints would only be...
1-19 of 45 Results
Top