Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 80 Results
  1. ZJ Grand Cherokee Forum
    hello, i have a 97 zj and the gauges stopped working randomly and now dont work at all. no door chime, no windows, but the radio works, the head lights work, and the engine runs. when i turn the key off the dash lights up and then the windows and radio work. i removed the cluster and replaced it...
  2. TJ Wrangler Technical Forum
    Our 97 TJ, 2.5 with 230K on the clock does not start now it is cold in the mornings. Key in ignition on gauges do not work all ignition lights come on as normal. Car cranks over but does not start - tried several times still the same. No CEL & no codes. UPDATE from my Son Later in the day temp...
  3. YJ Wrangler Technical Forum
    I was wondering if any of you had a wiring diagram for the gauge cluster on the 1990 Jeep YJ. I converted it over to a MC2150 and a HEI so I am going through the wiring harness and I must have cut one I was not supposed to. Luckily I am taking my time and checking everything inside every 5 wires...
  4. TJ Wrangler Technical Forum
    New to the Site. I just bought a used 06 Wrangler, and it drove great for the first few days, but was having some weird electrical problems. I pulled the battery and had it tested and it was found to be a bad battery (had corrosion and such also). I cleaned the battery ports etc, and it...
  5. YJ Wrangler Technical Forum
    I am trying to complete my 5.7 Vortec conversion and need diagrams for the jeep body wiring. Apparently, in 94-95 the new computer changes and fuel injection changed the color and location of the gauge wires coming through the firewall. I can't seem to find the diagrams for my 95 YJ. I need: 1...
  6. ZJ Grand Cherokee Forum
    Hello everyone! I was wondering if anyone had a diagram for all of the ZJ's engine ground locations for the straight 6 (This one is a 95'). I can seem to find lots of info for the XJ but after looking at my ZJ They don't seem to share the exact same locations as I don't see a ground on the...
  7. YJ Wrangler Technical Forum
    A few weeks ago I dropped my 89 Sahara off with a guy my dad knows to get my new nutter bypass carb kit installed. I just got it back and now the new led gauge lights that Installed months ago are not working. I've tried cleaning contacts and checking fuses but none of that has worked. I don't...
  8. XJ Cherokee Technical Forum
    Hi folks, new to forum, appreciate your help with strange heating warnings driving me nuts. Have both dash gauge and Ultragauge showing overheating on '99 XJ; been going on for awhile. Ultragauge shows temp rising above 215 degrees within 15 mins. of driving, and gets to alarm range at highway...
  9. TJ Wrangler Technical Forum
    So I finally worked out every last little issue i could have and my TJ has been running better than ever! ..for about three days. The jeep: 1997 TJ 4.0L 5sp. new motor, sensors, battery, alt, etc.. easier said, everything under the hood minus intake and flywheel. What happened: I was driving...
  10. ZJ Grand Cherokee Forum
    background: I recently got this jeep in tip top shape for the winter by doing a head gasket replacement and cleaning and painting every part along the way. Drives great for about 2 months and took it on several long camping trips I was driving along fine, I have been regularly checking the temp...
  11. XJ Cherokee Technical Forum
    gauges illuminate but are all dead. door locks work when ignitions on. fuses are okay from underhood and under passenger side. I tapped into both cigarette lighter and power out let..i used to cigarette lighter because I have an aftermarket radio and it needed another ign turn on 12v source...
  12. XJ Cherokee Technical Forum
    Hi! This is my first time posting on this forum, so forgive me for any messups or anything. Anyways, I just got my brothers old 1998 Jeep Cherokee Sport, and I love it. It works fine, although the only current problem right now is the Instrument Cluster. Most of the time it doesn't work, and...
  13. Jeep CJ Forum
    So first let me tell you what I did: I replaced the fuel gauge, fuel sender, temp sensor, temp gauge, oil sender, oil gauge. Fuel Gauge moves straight to F in 2 seconds. Disconnect the pink wire at gauge, back to E. Sender tests at 25.4 Ohms. Testing the fuel gauge connection to pink wire...
  14. XJ Cherokee Technical Forum
    Ive been trying to figure out why my temp gauge spikes from 210 to 250 rapidly when in motion. it will not exceed 250, and will either gradually reduce back to 210 or stay at 250. when i pulled in the driveway it peaked at 250, and spit out a large amount of coolant. I have replaced the water...
  15. TJ Wrangler Technical Forum
    I have a 2003 TJ 4.0 5 speed manual. The other day I was driving home from work and started having a real bad misfire. Engine would not go higher than 25mph, gauges tachometer and speedometer gauges jumping all over the place. I stopped at the auto parts store and had them read the engine light...
  16. ZJ Grand Cherokee Forum
    Alright so I'm at college right now and I don't really have a whole lot of time/money to invest in this thing, but I would really like to get my zj running again without taking it to the shop. What's wrong: - No reaction from gauges after switching the key to the on position (i.e. no reading on...
  17. Wrangler General Discussion
    Anyone taken the stock gauge cluster from their wrangler and made them into individual gauges? I've heard of people talk about hard wiring stock gauges, but I've never heard of someone actually doing it. I have seen many jeepers redo their dash and among the first thing to be replaced is the...
  18. Audio, CB/GMRS/Ham Radios, GPS, & Electrical
    I own a 98 Jeep Cherokee that has issues with the cluster panel. Today I started it up and none of my gauges were working. I flicked my high beams on and off and all my gauges came back to life. Do I have a bad connection somewhere? All the fuses look fine.
  19. TJ Wrangler Technical Forum
    I recently washed my engine and fried my original PCM:(.. My TJ wouldn't start so I bought a PCM from Ebay. After installing the new PCM, my tj started up fine, however, none of my gauges worked and the low fuel and check engine light stayed on. I drove it for a few miles and notice that the...
1-19 of 80 Results
Top