Search Results for ‘gasket’

Hey all, So I've blew my clutch master cylinder and ordered a Luk Master and Luk Slave (I have a '91 but have the external slave mod). I opted for Luk because I could not find an OEM unit, and my understanding is Luk supplied the OEM clutch, so figured I'd go for their hydraulics. I noticed...

Hey everyone, I'm still a noob so sorry if there is already a thread on this, but I'm wondering what valve cover gasket to get for my Jeep. It's a 1992 Cherokee with the 4.0 HO motor. I've seen all sorts of different gaskets online- there is an OMIX ADA one, Fel-Pro PermaDryPlus, Fel-Pro...

I have a 99 tj sport and I just replaced the head gasket, machine the head, radiator, hoses and thermostat. About a month later I started to notice that the temp was increasing. There is no smoke coming out of the exhaust and there are no leaks on the ground. Can you help me with this? It has...

Hey all, Found out this past Friday that my 05 WK is in need of an oil pan gasket replacement. Leaking oil out of the front but not in massive quantities. Oil inside is still clean for now but they refused to change the oil just in case that caused more issues. I'm not mechanically inclined...

I've a '96 ZJ with a 5.2. The transmission is out for overhaul and I note the crank position sensor gasket/grommet is wildly mangled ( I thought it felt weird when I replaced the CPS). I'd like to close that hole up. Does anyone know a source for that bit of rubber? The last two evenings of...

Hey guys I decided to check on my transmission and possibly do a fluid change. However I noticed a gasket or something that once resembled rubber in the shift tower. It was all cracked and broken apart and only accounted for about 1/3 around the hole. However some of the gasket/rubber fell into...

Hey fellow Jeepers, a year ago my TJ had a awful knock and I thought maybe it was a dead lifter. Well with a lot of research I decided to pull my engine apart and investigate the knock. Little did I know how much work I was in for. So to get to the short of it I Dropped the oil pan and in the...

Sorry if this has been addressed in the past, but I wasn't able to find a thread on it. Anyway, I know the standard procedure is to use rtv to seal the rear diff. Does anyone make a regular gasket for it, though? And if they do, am I ok to use it? I don't mind using rtv, but honestly I'd...

When you buy a Cherokee, make sure you inspect the coolant. People are filling their Jeeps with stop leak to cover cracked heads/head gaskets. This will run you anywhere from $400-$1,500 if one of both are bad. It will mess with your heater core, and just leave a heap load of work for you...

The Dana 300 on my Jeep is leaking a lot of oil I need to make absolutely sure it does not leak as I taking my Jeep for inspection to obtain my licence plates. However one drop would be enough to fail the inspection :( I bought this kit from ebay http://www.ebay.com/itm/201125921401 However...

1990 2.5L YJ I putting a new oil pan gasket set on the 2.5L and have a question about the tab position of the front rubber gasket. Tab pointed toward front of engine or toward rear of the engine. If rear, it will overlap the cork gasket. But that is what it looks like in the Chiltons manual...

Hi there... First post! Owned many jeeps in the past but am just getting to the level where I want to dive in and learn more. Just bought this 85 CJ7, looking for a learning opportunity. Well, something happened while driving yesterday and I get to learn! Overall she's in good shape but I think...

Did a fluid change on my TC yesterday. Changing all the fluids since I don't know when the previous owner did it. Only leak I have is the rear main seal, no leaks from the case. But when I took out the drain plug this came out. Almost looks like a rubber belt or gasket?

I'm changing the valve cover on my 1992 XJ w/ 4.0 liter and have a semi-retarded question.... For the ports for the PCV and EGR (one line back to air filter, one back to intake manifold), there are 3 small bolts securing a triangular shaped aluminum piece to the valve cover (one for each port)...

Hello all! Great to finally have my Jeep running. Gave it a full tune up, also replaced the pump, TSTAT, and hoses. Now another issue. To begin with, my radiator does leak. It has a small pinhole leak near the passenger left hand side of it. Though, my engine is blowing white smoke and when I...

I have a 95 Jeep Wrangler, 4-cylinder SE. I've had water leakage for over a year now, and just recently changed the head gasket for a second time. Water leaks from below the exhaust/intake manifold. I can't get a clear view of the exact spot it comes from, but when I give it some gas while...

Hey guys a few weeks ago my exhaust got really loud and upon further inspection I found I had a cracked exhaust manifold. It is the two piece style so it is a little rarer than the one piece style but evidently it happens. Sa as a result I decided to be a little cheap (wait this become...

Ok, so last night I was driving back home on the highway and noticed my oil pressure dropping fairly quickly. I pulled off the highway to a gas station and discovered a small pool of oil under the jeep. I was still about 80 miles from home so I bought some oil and put about half a quart in. I...

While chasing down an oil leak and discovering it was the oil pressure sending unit (passenger side on the block block near the firewall), I cleaned and degreased the valve cover. Now I discovered there is a small spatter of oil (about the size of a dime; not a drip or a line) on the side of the...

My 88' Grand Wagoneer has some awful cracks all over my windshield and I think its now time to replace it, I've done some research and I found a brand new windshield at my local glass shop for about $95 dollars which is fair, but the only thing that slows me down is the gasket, I just keep...