Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. TJ Wrangler Technical Forum
    Been searching a lot but I haven't had any luck with removing the shifter boot or replacing the plastic nut on the bottom of the shifter rod. My AX15 has pretty crisp shifts but pops out of 1st sometimes (more often lately and mostly when under more load like starting from stop on a hill). 140k...
  2. TJ Wrangler Technical Forum
    I am a new owner of a 1999 TJ 4.0L 5-spd. 174,000 on original engine. Now for the issue: Once the Jeep is warmed up (after 15-20 mins of driving) I will be either in reverse or in 1st gear turning into a spot and I hear a loud metal on metal clanging from underneath the Jeep. I don't know...
  3. JK Wrangler Technical Forum
    My '10 JKU had done the dreaded "popping out of first gear" thing occasionally, but never enough to worry about it. But in the past month, it started doing it more and more...almost every day. So I brought it to the dealer along with the Service Bulletin from March 2010 (thanks to whoever posted...
  4. ZJ Grand Cherokee Forum
    I have a 98 GC with the 5.2V8 limited and 151K miles. I beleive the transmission is the 42re. I went out the other day and it would not shift out of 1st gear. I did manage to get it to do it a few times. If i would rev it up pretty high and take my foot off of the gas it shifted but only a few...
  5. Jeep CJ Forum
    I've got a 73 cj with the 3speed. Maybe T-14, not really sure. Its got some problems with shifting sometimes. 1. If I'm pulling pretty hard in high, and try to downshift into 2, it will not go at all. I slow down enough in the process of trying to get it into 2 that I can go into 1, but...
  6. TJ Wrangler Technical Forum
    Just bought my first wrangler--98 Sport, I6 with a 4" lift and 33" BF Goodrich all terrains. I've heard great things about this forum and am excited to learn as much as possible. When I first got it the clutch was loose and only 50% of pedal travel gave any resistance. I replaced the slave cyl...
1-6 of 6 Results
Top