Search Results for ‘engine block interchange’

Hi All, I've got a 93 Wrangler with a 6 cylinder engine. My check engine light stopped working after I had the engine replaced a couple years ago while on a road trip from Missouri to California. In California, the light needs to work to pass smog and I'd like to get it fixed. I checked the...

So to preface, my 98 Jeep Grand Cherokee Laredo's engine died. I let a buddy borrow it, he didn't tell me a sparkplug wasn't firing and it killed the engine. The question I have is, will a 95, 94, or a 93 Grand Cherokee engine work in mine? This would be much cheaper than buying a $1,000 used...

Hey all! I've never owned a Jeep before and I saw for sale a '1989' Jeep Wrangler.. Basically the guy freshly installed a factory rebuilt Jasper 4.2 liter engine with 100,000 mile warranty with less than 200 miles on it. He also replaced things like: All new belts, hoses, wires, cap, rotor...

Hi guys I'm doing my 5.2 swap this weekend. My jeep is a 5.2, 1995, so pre obd2. I've pulled a low mileage 5.2 from a 96 and am wondering which sensors are incompatible/compatible for my application so I don't have to go and buy more parts lol. Obviously I'll be exchanging the intake and exhaust...

Hey Guys, Facing a bit of a dilemma, here is the quick background story. Bought a 2000 XJ in 2005 with 60,000 on it. Have used it as my everyday car up until last winter, it now has 155,000. To be honest, I was young and careless and I did not really take great care of her. Usually went 5k in...

Well, just bought a AMC 360 to install into my 87' Grand Waggy to at least get it going and smogged. The guy I bought it from is a good customer of ours at the shop I work at. Ran good, decent compression, however he thinks it's a 77', not an 84' so now I am wondering if I opened a can of worms...

Hi, long story short, I thought the 99' engine was identical to the 98' 4.0. We are having a hell of a time trying to see what we can use from the 98's and install on the 99' short block I recently purchased. The 98' has a bad cyl/low compression that is why we are replacing it or trying to...

92 YJ 2.5L has a cracked block and lots of water in the oil so looking to swap it out. Have found an engine from a 94 YJ on ebay, which after lots of googling around I think will fit. Anyone know if there are differences between the 2 ? The guy/jeep breakers selling it says may need to swap...

I am stationed in germany and picked up a 01 RHD cherokee. does anyone know how to go about checking if it can be brought back to the states? second question i ordered an A/C compressor for 01 4.0L cherokee but the bolt holes do not line up. also would you rebuild the engine or buy new crate...

:cheers:Well, after figuring I am going to keep this 98' Cherokee, I need to find a good, dependable reman 4.0. I have a blown head gasket, has 145,000 on the engine. Don't think the last owners really took care of it too well! I figure why have a new head and the bottom has 145,000? My mechanic...

Now I know a lot of people have had issues with getting the 2 external Torx bolts on top of the engine, and I have already taken the engine out and am in the process of putting another engine in. I seemed to have lost the bolts that are around the rest of the bell housing that connects the bell...

Are all 4.0 Inline 6 blocks interchangeable? Meaning can you take a 89 Cherokee block and throw it into say a 2001 Grand Cherokee? or other way around? A block is a block right?, same mounting bracket placement, bolt pattern for tranny, intake/exhaust ports, sensor placement and such? :confused:

I have a 1998 XJ with a 4.0 and am looking for a replacement engine. I found a 1998 Wrangler TJ 4.0 engine. Will it work for my XJ? I think I need a pre 99 engine but am not sure which models and years will work. Someone told me the Grand Cherokee engines will not work for my XJ???? Any...

Ive got a 2000 Cherokee Limited, 4.0L w/coil packs instead of dist. 2xx,xxx miles. It started knocking so I parked it (after listening to morons that had me put thicker oil and yada yada). Motor is at the machine shop and one of the pistons broke and screwed one of the cylinders. Theyre looking...