Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 16 Results
  1. ZJ Grand Cherokee Forum
    Ok so I’m stumped. So I bought a Zj and I lifted it 3in. I changed the all steering components. And track bar. I know there can be death wobble but hear me out. Can there be death wobble when all wheels are jacked up? I never knew I had this problem until I took it on the highway. . I’m driving...
  2. ZJ Grand Cherokee Forum
    I put a 3.5" lift on a while back (seems more like a 4", sold as 3.5 ~ 4") and it came with crossmember blocks to lower it a inch or so. I just did a transmission swap to a AX15 and used the donor front axle and had the rear one cut because I also went from a NP231 to a NP242 and the slip yokes...
  3. YJ Wrangler Technical Forum
    I have a 95YJ 2.2 with a ax-5 that is a daily driver. 2.5 rough country lift with a transfer drop. No track bars or anti sway bars. I replaced the 4.10's in my D30 with 4.88's 15 months and 12,000 miles ago, work done by me. Spartan Locker was in 3 years ago. Last fall changed from 32x11.50...
  4. XJ Cherokee Technical Forum
    I'm working on correcting the drive line on my 1996 Jeep Cherokee with a 6" lift. It has an NP242 transfer case, First i need a slip yoke eliminator and was wondering if anyone has a link to a slip yoke eliminator for my t-case because I can't find anything. Also i need to drop the T-case...
  5. XJ Cherokee Technical Forum
    What I'm working with at the moment: 01 XJ LP D30 ~4" of lift: OME springs/shocks, ~1" spacers/shackles 1" t-case drop (not ideal, I know, but a SYE will have to wait a while) IRO double shear track bar IRO Adjustable upper and lower arms IRO Tie rod IRO extended sway bar links 30x9.5 BFG AT's...
  6. YJ Wrangler Technical Forum
    I have a 2.5L Auto YJ that has just recently developed a bad vibration under acceleration between 31 & 35 miles per hour if I take my foot off the gas it stops completely. It developed Tues of this week. Anyway I took it to a trusted mechanic we have worked with for years, he says its my rear...
  7. ZJ Grand Cherokee Forum
    Hey guys, I've got a Limited 95 ZJ with 60K miles that has some drive line issues (vibrations and noise) after the front axle was replaced. I would like to sell but am hesitant due to this condition. Just curious of what my options are for getting some money back on it. Are there salvage...
  8. YJ Wrangler Technical Forum
    1990 Jeep JY, 4.2L, 2.5" lift, daily driver Earlier this summer, I replaced my worn motor mounts with Brown Dog mounts with polyurathane bushings; I also replaced the transmission mount with a new polyurathane one. Fast forward to October, the Jeep has some vibration between ~45 and ~55 mph...
  9. Vendor Display
    TOM WOODS DRIVE SHAFTS for your JK with Billet Steel Flanges From ROCKRIDGE 4WD! Front or Rear Same Price! Click Here! FREE SHIPPING!!! There are many different ways to build a drive shaft for the new JK. One method uses an adapter flange which bolts directly to the original pinion flange...
  10. Vendor Display
    Jeep JK Driveshaft Prices THAT CAN'T BE BEAT!! Free Shipping Included! CLICK HERE--> Jeep Wrangler 07-10 JK 2/4 Door 1310 Front Driveshaft Upgrade CLICK HERE--> Jeep Wrangler 07-10 JK 2 Door 1310 CV Rear Driveshaft Upgrade CLICK HERE--> Jeep Wrangler 07-10 JK 4 Door 1310 CV Rear Driveshaft...
  11. ZJ Grand Cherokee Forum
    Whenever I put my jeep in reverse i get a whining and the idle goes up and down. It feels like something is binding up. Today I was backing down a driveway and it did it. then when I put it in drive it was idling at 1000 rpm's. I then put it in neutral and it went back to normal. I have also...
  12. TJ Wrangler Technical Forum
    2006 TJ Rubi. I purchased the UCF Deep cover system consisting of: 1" Deep Ultra High Clearance T-Case Skid Engine Skid LoPro Mount 1.25" JKS BL (INSTALLED) 1" MML (INSTALLED) I haven't installed the TT yet cause I'm worried about getting Driveline Vibes. Next step would be to get a double...
  13. JK Wrangler Technical Forum
    After changing my rear pinion seal I am getting a shudder type vib. This dosent happen all the time, comes and goes. any suggestions?
  14. General Discussion
    For my 30th b'day... A few weeks belated, but still, it was great! and I cant wait to go again... West TN Skydiving was awesome! And I look forward to going through the AFF class there along with my wife. You can skip the first 2:00 minutes if you want, it is really just a commercial for...
  15. TJ Wrangler Technical Forum
    Is there anyone running 5.13's and 33's that is picking up a front drive shaft vibration starting at 60mph? I know the drive shafts are spinning approx. 25-30 mph faster than stock. I thought there was a problem with my stock shaft with 15k miles so I ordered a Tom Wood's front shaft and it is...
  16. TJ Wrangler Technical Forum
    I have determined that I may need to find a solution to some serious driveline vibration, and since this is "new territory" for me, I have no idea what I might need to look out for. I have a 2005 Jeep Wrangler X (manual, 6-speed) that is running a 3.5" Rubicon Express Super-Flex Kit. I am also...
1-16 of 16 Results
Top