Search Results for ‘dragging’

Recently the front driver side caliper locked up and was smoking badly. I Decided to try to rebuild calipers but caliper still locked up. Purchased remanufactured caliper with new rotor and pads. After all of the brake parts were put back on Jeep and brakes bleed on all four wheels, I attempted...

I've recently come into possession of a 2011 JK that is the new bane of my existence. I could go on for days about all the issues I've had to chase down with it, but the most recent issue is really stumping me. This summer, the front left had the outer brake pad fall out and the caliper piston...

I have a 2007 WK, and after I go off-road I hear this weird sound coming from the driver side front wheel well. It sounds like I'm dragging a piece of plastic along the pavement (it did the same thing after going on the beach with stock tires, too). Usually I hear this noise when turning, but...

Hey, I have an 87 yj. I had issues with not being able to drive much over 40mph. I took the front brakes apart and my rotors were warped and pads cracked to hell. I replaced the calipers, and pads, and rotors. It was still dragging. I went to replace the hoses, and couldn't get them off...

So I've developed a squeaking/ squealing/ scraping in my front end. I disconnected my front ds and it had no effect on the noise. I jacked up one tire and tried to spin it and had a good deal of resistance. I was able to get the noise to happen faintly when I spun the tire as fast as I could...

My right front brake is dragging on the lower side of the inner pad. It doesn't look to be the piston. It seems one of the sleeves that hold the bolts doesn't slide back and forth all the way. Can this be fixed, or should the whole caliper be replaced? Thanks (not actual picture of my caliper)

Took those termoquiets and wagner rotors back to advance. Did some sketchy things, made a little bit more money back than I spent, went to Napa and got the ultra premium rotors and adaptive one pads (they look so much nicer to begin with) Jacked the from up a good foot off the ground...

I could really use some help. My Jeep has developed a problem with the clutch not releasing all the way. It feels like air in the slave cyl. However I am sure this is not the case (new master and slave from AdvanceAuto has been well bled multiple times). I am just looking for advice on where to...

My clutch is fast on the way out.... Crappy 14.7. I'll post the video's later of the clutch basically frying on my one run. Gotta love it. BTW: Squeaking are Teflon Rear Trailing Arm Bushings. Those of you who run poly bushings on your rigs have probably had a similar squeak at one time...

I first thought the boy at the shop zip tied my drive-shaft or something. Well I was wrong. Because the other night I was driving home and noticed this click/clunk/pop sounds like it is coming from the under the front of my jeep. It only starts up about 10+ mph. I tried trouble shooting...