Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 49 Results
  1. XJ Cherokee Technical Forum
    I'v been doing some searching, possibly ♫♩ in all the wrong places ♪♫, and cannot find a diagram for the ECU/ECM for my Jeep. The goal is to see if one can be scratch-built. I know that in another forum, for Subaru, one user had made on using a Rasberry Pi. I'm looking to go a little more...
  2. XJ Cherokee Technical Forum
    So I'm building a skid plate for my 94 XJ, I want it to protect the oil pan area, transmission pan, and transfer case area. This is my outline so far any thoughts or comments? The red circles are spots for bolts where the "metal" plates will connect, and the purple hard lines are where the final...
  3. Cheap Tricks & Fixes
    Hi everyone--I've tried searching through the Cheap Tricks & Fixes forum and haven't found an answer to this (which may be more about my search skills than the forum), so I'm starting a new thread. I'm looking for a low-cost padding solution for my roll bar for my '89 YJ. I have the original...
  4. TJ Wrangler Technical Forum
    I posted a pic on the "What did you do to your TJ today" thread and someone asked for a write up, so here goes. Want some grab bars? who doesn't? sure beats floppy nylon handles for keeping passengers still when wheeling and the DIY cost keeps the wife off your back. If you're like me and have...
  5. Engines & Drivetrain
    Just finished rebuilding an AX15 5 Speed for a build that I am doing. While I am not a transmission technician, I did find this to be a rather simple project. The following are 3 videos that outline the steps that I took to accomplish this. While this is not your How-To video, it does show...
  6. KJ Liberty Forum
    I have an '02 3.7. It started rattling, so took off valve covers to find out the passenger side timing chain was bouncing and hitting the upper nylon guide causing the noise. So, I tore down the front and took off the timing cover to find the tensioner had basically fallen apart - the...
  7. ZJ Grand Cherokee Forum
    Hey everyone! So, I recently purchased a 1992 Jeep Grand Cherokee and it is definitely a fixer up...definitely a fixer upper. Some of the issues, that i know of, are: Transmission and coolant leak somewhere, death wobbles whenever it first starts and sits idle (and randomly throughout the...
  8. WK Grand Cherokee & XK Commander Forum
    Hey All - Replacing my EGR tomorrow, and want to just buy a replacement bolt ahead of time to avoid any potential drama with cutting the original bolt once everything is apart. (Murphy's Law says I'll cut it too short and will be stranded unable to drive to the hardware store for lack of a...
  9. Fabrication Shop
    Hey yall, after looking at what is available as far as upper control arms go, I honestly think I can build a very bullet proof version for about the same cost or less than the usual brands. This will be for a WJ so I expect about 15 to 19 inches of adjustablity or I'll make a bit longer than...
  10. WK Grand Cherokee & XK Commander Forum
    I own a 2008 WK with the Hemi with 65K Miles. Fully stock which is a shame, because looking at some of the builds on this forum I'm very impressed. If I only had the time..... Recently, I noticed the exhaust sounding a little louder than normal, and upon inspection found that the muffler had a...
  11. ZJ Grand Cherokee Forum
    I have finally decided that I should take the plunge and start working on my rig. I have read a lot of great and amazing things that you all have done and I figured it was about time that I get my butt off the couch and do the same. So I purchased this gem a few months ago. I got her for 2...
  12. ZJ Grand Cherokee Forum
    Hello my fellow ZJers!!!! I am finally living my highschool dreams and just bought my first jeep. It was one heck of a score! '98 Grande cherokee with only 130k miles on it. She is in dang near perfect condition as well. I have started a list of things that need to be done, Some of which I am...
  13. Grand Cherokee General Discussion
    We're giving away a 1 year premium membership for the holiday season and since I've always been a fan of Chevy Chase's creativity and ingenuity, the theme is: Best Do-It-Yourself Modification! The rules are simple: To enter, reply in this thread with pictures and information describing your...
  14. ZJ Grand Cherokee Forum
    Hi, welcome to my build thread. My goal is to build a reliable expedition and camping vehicle for my family. Having the jeep be killer in the snow will be an added bonus when I have to get to work or go snowboarding during a storm. My plans are: to put 31" tires and 2" lift on. I don't want to...
  15. TJ Wrangler Technical Forum
    Hey everyone. Has anyone built their own flat tube fenders or fenders. I have thought about just cutting the factory ones, buying fenders, and now just making my own. If anyone has, I would like to see pics and etc. also I would love to learn from any mistakes haha. Btw it's going to be on a...
  16. YJ Wrangler Technical Forum
    So i was talking to this guy i work with and he was talking aboutmaking a new soft top. Mainly a safari top. i was thinking about using http://www.amazon.com/Super-Screen-Inch-Black-Mesh/dp/B005I5SMRU/ref=sr_1_12?ie=UTF8&qid=1404299300&sr=8-12&keywords=mesh+bug+screen as the material. Just a...
  17. WK Grand Cherokee & XK Commander Forum
    This is a simple write up just to give people a glimpse at how easy it is to change your rear shocks. I installed Monroe 58643 Sensa-Trac Load Adjusting Shock Absorbers which are meant for a F150. However the procedure is pretty much the same for any shock, these are just a little more work...
  18. Fabrication Shop
    So I was thinking of a cheap way to gain some storage space and be able to keep my backseat in my TJ. So I had an idea to make/hack a Harbor Freight tow hitch rack. First I stared with this http://500-lb-capacity-deluxe-steel-cargo-carrier-69623 This rack comes in 5 pieces. Two halves of the...
  19. XJ Cherokee Technical Forum
    My rocker panels are needing to be replaced and I was thinking of just putting some metal tube/bar there instead of a rocker panel. My question is if I wish for it to be used as a rock slider, do I need to support it with the uni-frame rail? Or should the bar/slider be fine on by itself since...
1-19 of 49 Results
Top