Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 64 Results
  1. Rancho Suspension
    TL/DR They are beefy and rebuildable! Check with your favorite retailer on cost Designed to improve ride quality by reducing noise, vibration and harshness, Rancho® rear lower and upper adjustable control arms are designed for your stock or lifted Jeep® Gladiator (up to 5-in.). Made of...
  2. Vendor Display
    TL/DR They are beefy and rebuildable! Check with your favorite retailer on cost Designed to improve ride quality by reducing noise, vibration and harshness, Rancho® rear lower and upper adjustable control arms are designed for your stock or lifted Jeep® Gladiator (up to 5-in.). Made of...
  3. JK Wrangler Technical Forum
    I have a 2012 JKU Rubicon with a 3.5" AEV Dualsport lift with geometry correction brackets. My front driveshaft finally blew out the seals so I ordered a 1350 front from Tom Woods. I have yet to install it. In the meantime, the rear driveshaft started making a click when letting off the...
  4. Rancho Suspension
    Rancho® has NEW front, upper and lower Adjustable Control Arms for your stock or lifted Jeep®. The new Arms work on a range from stock to 4.5-inches and the front upper arms allow caster and pinion angle adjustments on the vehicle. This will save time on the alignment rack to allow the setting...
  5. TJ Wrangler Technical Forum
    Alright, so I got a wild hair and thought that I could swap in an 8.8 for my dana 35 in the rear. I am about halfway through my project and I am having some concerns. 1. When I weld up all the mounts and mock it all up if my measurements are off a little bit whats going to happen? 2. If it is...
  6. Vendor Display
    We have recently launched our rebuild kits for the control arms and track bars that use our D2 bushings. Check with your favorite retailer on pricing!! Thanks!
  7. WK Grand Cherokee & XK Commander Forum
    Howdy, I'm looking to replace my UCAs with something heavy duty. Obviously I'd love a set of H&M engineering's UCAs, but those seem to be impossible to find these days (hard enough when they were made). What alternatives should I look for, and how much should I expect to pay roughly? Thanks all!
  8. Rancho Suspension
    We have recently updated our control arms to be rebuildable and you can now purchase as a set or by axle. Our D2 bushings are now rebuildable too!! These arms are beefy with 2" OD on the lowers and 1.25" OD on the uppers! Reduce road noise, vibration and get improved handling. Check with your...
  9. Vendor Display
    We have recently updated our control arms to be rebuildable and you can now purchase as a set or by axle. Our D2 bushings are now rebuildable too!! These arms are beefy with 2" OD on the lowers and 1.25" OD on the uppers! Reduce road noise, vibration and get improved handling. Check with your...
  10. Rancho Suspension
    JK owners!!! We have taken our tried and true geometry correction brackets for the JK platform and add even more options for castor with 4 holes. Our one piece design makes install incredibly easy. No need to fumble around with plates! You asked for it and we listened! Check with your favorite...
  11. Vendor Display
    JK owners!!! We have taken our tried and true geometry correction brackets for the JK platform and add even more options for castor with 4 holes. Our one piece design makes install incredibly easy. No need to fumble around with plates! You asked for it and we listened! Check with your favorite...
  12. Rancho Suspension
    We have launched our NEW adjustable control arms (upper and lower) with our new D2 rebuildable, self-centering bushings. These bushings will help reduce noise, vibrations and improve handling. Made with heavy duty DOM , they will hold up to the abuse you throw at them! They are now available...
  13. Vendor Display
    We have launched our NEW adjustable control arms (upper and lower) with our new D2 rebuildable, self-centering bushings. These bushings will help reduce noise, vibrations and improve handling. Made with heavy duty DOM , they will hold up to the abuse you throw at them! They are now available...
  14. XJ Cherokee Technical Forum
    I have a 95 XJ. i found new rubicon coils, control arms and shocks for a 4 door rubicon for real cheap. Would the fit on the XJ? Or am i better off just buying a brand new express lift and flipping to new stuff? Help.
  15. TJ Wrangler Technical Forum
    I have a 1999 TJ with 2.5" Rough Country springs and 1.25" body lift on 33s. I took it off-roading for the first time last weekend and had a blast, however the bushings on my rear upper control arms blew out. I'm looking for advice on where to go from here. Also, I do NOT plan to upgrade to...
  16. ZJ Grand Cherokee Forum
    I just installed the 3.5" IRO lift on my '96 (5.2 with the 249) . Everything went pretty well but I'm getting just a bit of vibration up above 55mph when I let off the gas. The pinion angle isn't perfect, but it's close and the behavior sems more like what I'd expect with a CV that's starting...
  17. TJ Wrangler Technical Forum
    I have a 98 tj with about 4.5" of suspension lift, f8.8 and sye kit with stock control arms. I want to buy the full control arm savvy kit. Can anyone tell me the full adjustable length, from hole to hole shortest length and longest length? and will i notice a difference in my ride?
  18. TJ Wrangler Technical Forum
    Im building my own lift and im thinking of going with the the metalcloak duroflex joints for my control arms. Has anyone had any experience with these before?
  19. TJ Wrangler Technical Forum
    Hello all and thanks for checking out my post. I have a 2000 Wrangler which currently has a 4" rough country x series lift installed. Unfortunately this lift has the older style Rough country adjustable control arms which are black on black with no locking nut on the adjustment. It seems...
  20. TJ Wrangler Technical Forum
    A little back story, sorry, will keep it short: As a surprise, my wife contacted a Jeep Club to install a 4" Tuff Country EZ Ride Suspension Lift on my 2006 TJ while I was deployed to Iraq. She got the lift from JC Whitney but they sent her the lift for a 2007. This was not caught by the...
1-20 of 64 Results
Top