Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 62 Results
  1. WJ Grand Cherokee Forum
    Hey everyone, I got a question. I have a 2004 WJ limited, and I recently installed new upper and lower adjustable control arms (core4x4) and a HD trac bar(trail forged).. so I took it to a shop to installed them, and now ever since I’ve been getting a lot of noice and cranks, any suggestions on...
  2. WJ Grand Cherokee Forum
    I have an '04 WJ with a 2 inch Rough Country lift. Bought it in 2017, seller said he got the lift in 2016 so it's been about 6 years since the install. It's unfortunately time to replace the rear** stock upper control A-arm and ball joint/mount. While looking into how to do this job on YouTube...
  3. WK Grand Cherokee & XK Commander Forum
    After hours of searching aftermarket replacements of my LCAs, I narrowed down to Moog RK series (RK621374/5) and Mevotech Supreme (GS25170/1). However, I have found mixed reviews about how Moog RKs are made in China and Mevotech doesn't last long. Which should I go with?
  4. TJ Wrangler Technical Forum
    Hi everyone, i bought my 2003 jeep wrangler about a year and a half ago, and i need to replace the control arms. But i've never owned a jeep before this so i need help. i have about 3.5 inches of lift on it (put on by previous owner so i don't really know anything about it) does the lift affect...
  5. WK Grand Cherokee & XK Commander Forum
    Hi all I've recently bought a 2007 3.0CRD JGC with some wasted front suspension. New shock absorber and track rod end required on the same corner. I've already bought a pair of each but have been advised to replace the larger of the control are bolts. I'm just struggling to find the actual size...
  6. ZJ Grand Cherokee Forum
    On a 1996 Grand Cherokee the lower front controls arms have holes on one side. What is the correct orientation when installing these arms?
  7. Rancho Suspension
    For the last three years we have been testing our D2 bushings in Moab Utah on rental Jeeps, and from coast to coast on trails like the Rubicon, Rausch Creek and other trails along the way. The toughest testing out there. The results? A bushing that absorbs up some of the toughest trails out...
  8. Vendor Display
    For the last three years we have been testing our D2 bushings in Moab Utah on rental Jeeps, and from coast to coast on trails like the Rubicon, Rausch Creek and other trails along the way. The toughest testing out there. The results? A bushing that absorbs up some of the toughest trails out...
  9. TJ Wrangler Technical Forum
    I have a 98 TJ 4.0 on 35 x 12.50 BFG AT. I purchased the jeep already lifted about 2 years ago. It is a suspension lift, approximately 4”. The upper control arms are stock. The lower control arms are from a lift package. Here is the problem. My lower control arm bushings are worn out and I have...
  10. WJ Grand Cherokee Forum
    I've got a 3" IRO lift on my 2004 WJ. Had some problems early with death wobble and thought they were solved. Not quite, encountered it twice last week so I'm trying to work through the parts to see what's wrong. JKS adjustable track bar is tight with no loss of torque from...
  11. Fabrication Shop
    It seems in my area a36 is the norm and a500 or anything with a 10 in the beg is very hard to find. I have a few more shops to call around on as I only need a couple of feet for some Upper Control Arms. My thoughts are could I just go a bit thicker with the a36 instead of .120 go to 3/16...
  12. TJ Wrangler Technical Forum
    So I have this problem when I turn there is a bang/pop noise from the front driver and passenger side of the jeep. It sounds like it is coming from the wheel area but not exactly sure. I haven't been off roading or doing anything crazy in the jeep, just driving it normally. This has just...
  13. KJ Liberty Forum
    I bought our 2003 Jeep Liberty about 2 years ago. It had sat on a lot for maybe 3 or 4 years I think although the registration and taxes were all up to date. I noticed immediately that it squeaked and groaned quite a bit when steering left or right or going over speed bumps or potholes and...
  14. ZJ Grand Cherokee Forum
    hello everyone let me start of by explaining the accident. (Sellers story not mine)Any way he thought he would speed thro an tight s bend in the road. traveling at least 60-70 km. comes around the first right hand turn of the bend. jeep lifts up onto the driver side wheels nearly rolling over!(a...
  15. ZJ Grand Cherokee Forum
    I replaced the Front LCA bushings on my 98. I am positive that both the right and left had the slotted rubber instead of the solid rubber bushings in the forward position. The slotted ones are supposed to go in the front rearward according to all the parts descriptions and the solid in the front...
  16. ZJ Grand Cherokee Forum
    i am looking for a 3.5in kit the ones i have seen so far are the following http://www.ironrockoffroad.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=IR-Z_3LK...
  17. General Jeep & Off-Road Equipment
    Advice needed please! I have a 2008 Rubicon (Stock). The front lower control arm recently broke at its wield and bent after hitting a speed bump at speed so I upgraded to Rustysoffroad stronger mounts. I took it to 4-Wheel Parts in Austin to get wielded on. When I picked it up I noticed they...
  18. TJ Wrangler Technical Forum
    Unfortunately, managed to hit and mount a curb around 20-25 mph and did some damage to the underneath of the front passenger side. No body damage apart from needing a new wheel and tire which is easily replaceable, but got back on the road and realized the steering wheel was off... by what...
  19. ZJ Grand Cherokee Forum
    A little background to start with. This isnt my jeep but rather a customer's (I run a small shop) and I recently installed, against my better judgement, a 3.5 inch Iron Rock lift kit. After we installed the lift we couldn't align it because the rear tires were offset close to 2 inches to one...
1-19 of 62 Results
Top