Search Results for ‘comanche’

Been picking through the forum for a few years for Information, but finally had something that I felt gave me a reason to sign up and post as I now have work ahead of me. Had the old girl for going on 10 years just paying enough to keep it limping down the road, especially after I had to do all...

Hi, I have been dealing with some horrible death wobble on my 89 MJ. I can’t seem to find a website with the tie rods and a drag link. Only find 91 and up. So I guess my question is will the 91-92 ones fit my 89? I would think they would but I just wanted to confirm

I run a 1986 Jeep Comanche 2.5l and my fuel delivery is messed up it seems. I have bench tested the pump, which starts up immediately, checked the filter to make sure it wasn't clogged, and the only thing I seem to have an issue with is the relay itself. Here's the issue: I have to use a...

Hi, I've got a 1987 Comanche, 4.0L automatic with a sticky throttle. It doesn't reliably return to idle after letting off the gas. This problem has been happening for years, but lately it's gotten so bad that I don't feel comfortable driving it. I removed the throttle cable today to see if...

As part of my restoration I realized that I needed new leaf springs. Bought the new springs. and installed one. Discovered that the new springs are shorter than the ones that were on it. I have no idea if the ones I removed were original, or even correct. I verified that the new ones are the...

I am going down to pick up a non-running 89 Comanche on Tuesday. $600 has a 4 cylinder with a 4 sp, rwd. I have been told it will run if you use starting fluid but won't stay running. the body seems to be in desent shape, has a ding in the rear corner. minor hit. interior looks ok. So...

Hello all, new guy to the forum so please bear with me and share a little patience (and more importantly, knowledge). Is there a resource that identifies what transmission will bolt up to what engine.... Specifically, I have a 2-wheel drive 1989 Jeep Comanche with a 4.0 and a 5 speed...

Hi I just bought a Comanche that I have been looking for a while to find and wanted make sure it was the right one. last it was registered was 6 years ago but runs great and has been taking care of, although I feel like non of the fuses coming underneath the steering wheel look fine but none of...

Welcome to March 'manche Madness!!! in the JEEPForum COTM contest!! Comanches are getting harder and harder to come by nowadays so this month's show will be a real treat for anyone who's ever felt a little MJ love. There's something for everyone here with half a dozen solid examples for your...

I've got a 1989 comanche that I am attempting to install a Rusty's Offroad Products 4.5" lift. Front end is complete which was a total piece of cake thanks to all of the anti-seize used at the factory :drool: The rear end is another story. The spring pack has considerably more arch and as such...

I got an 87' comanche. So i want to get rough country 1.5 inch wheel spacers, but will it cause my 31in all terrains to have a wider pivot causing tires to rub the body? At one point the tires are barely an inch away from hitting? It has a 3 inch lift but i might go to rough country's 4.5 incher.

I have a 1990 jeep comanche 4.0l i6. 4 speed auto . I had a buddy put in a new engine for me. With the engine he did new injectors and intake manifold. When I got it back it ran a little rough. My main concern is that when I'm driving and it shifts from 3rd to 4th and drops rpms to about...

Okay here goes.... First of all I've searched for days on the problems and none seem like my situation. This has been an underlying problem since I bought the jeep it seems but its only gotten worse. Ive had several of my co workers and mechanic friends try to figure it out (I used to work at...

Ok, first time post here been meaning to join for a while. I have a MIMD boggling noise coming from either my transmission or transfer case. It sounds suspiciously like a wearing out bearing somewhere but it only happens in 2nd gear very faintly at first but if I push the clutch in while still...

Hi I just bought a 1987 jeep Comanche, has a 2.5 TBI, automatic trans. Got a used motor cause original was toast. Only difference with the used was it was manual trans, so changed flywheel. Got everything in, all lines, connections correctly installed. Problem is I'm not getting spray from the...

Picked up an 88 comanche for a parts hauler / daily this last weekend. 4.0, 2wd (ax15) longbed. Seems solid, needs a few things, paints faded, but I like it. I'd love to build it into a pavement pounder, From the research I've done, it seems like lowering blocks in the rear and cut coils from...

Hello, I'm new here, my name is Jake. I have found a Jeep Comanche for sale. from what I'm told and the pictures, the truck is in pretty good condition, except for on thing. The head gasket has been blown. Is it worth it to buy? (the seller is asking $1000) The Comanche has a 2.1L Turbo...

COTM Voting Rules and Guidelines If your entry makes it to the final poll you have one opportunity to vote for yourself if you choose to do so. A minimum of 25 technical posts are required to participate in the voting process. If you are found cheating in anyway, you will be disqualified from...