Search Results for ‘clutch linkage’

After experiencing all the headaches of the stock bellcrank linkage I've decided to do the hydraulic conversion using the 1980s 4 cylinder parts. I already have the 1976+ bellhousing with the tab on the driver side and 2 screw holes to accommodate the slave cylinder. My only question is whether...

A couple weeks ago I had an interesting experience on my way to work. While shifting from 2nd to 3rd gear I pressed on the clutch and it popped and went straight to the floor. I was still in 2nd gear and limped/coasted into a nearby parking lot. Eventually I determined that my release rod was...

Hi - Does anyone have experience with the Novak Hydraulic Clutch Linkage? I am considering replacing my mechanical setup with a hydraulic setup and came across their setup. Any feedback would be greatly appreciated. Thanks! Matt

I am attempting to put Saginaw steering in my CJ3B, I am using a frame from a 1973 CJ5 and the power steering box. I need advice (pictures, dimensions, drawings, anything that would be helpful), I am putting in a tilt steering column and hanging/swinging pedals from the CJ5. I also would love to...

I have a 77 cj5 I took the t150 and bell housing out of it and installed a 74 bell housing and b&g t15. Ever since I have done this I have had clutch rod adjustment issues can I use the 77 bell housing on the 74 trans?? There was a difference in length between the two bell housings and I'm...

Long story, sorry: Recently got an 81 CJ7 from my father-in-law, who hadnt done much with it since he got it 3 years ago from his father-in-law. It has sat outside uncovered for quite a while, so there's plenty of rust, etc...its a project, but it was driving until this past weekend. I drove it...

I just bought a 1973 cj5, it has a built 283 in it. nothing is changed about the transmission, and as i got it home its as if the clutch pedal will not disengage it from gear if it is in gear. Im not sure whether to replace the clutch, or the clutch linkages. I saw another thread where someone...

Hey guys, I first have to say thanks again for the outstanding support you all gave me during my fronte-end rebuild. It came together great, and the Jeep has been awesome. I plan to post some pics of the rebuild once I organize and compress them. Now to my new problem. Just today on the way...

This is my first "build thread" so I figured I start with something small and relatively simple. Please bear with me. Jeep: '85 CJ7, 258, T-5 transmission, Dana300 TC. Background: I noticed my clutch was "inconsistent" and seemed to Jump, or drop into gear. I hoped it wasn't something that...