Search Results for ‘carb’

Still new at this… been trying to get my yj going for days. Installed fuel tank, new dizzy (gm performance). Starts rough with foot on gas sometimes then shuts off. Will just crank… I’ve got spark and I believe timing is correct… everything is in position, I’m lost and can’t figure this out...

Over the past 3 weeks I have torn apart the top end of my 304 and put all new seals and gaskets. I also did the oil pan while I was doing everything. Well, I put it all back together primed and cracked, and she started right up. Then I noticed a pin hole in the water pump. So out everything...

So recently I had a MC2100 on my 304 and it ran well except for it backfiring and bogging when accelerating more than nothing. I had an Edelbrock 1406 laying around and decided to rebuild it. Followed a video and pretty sure I did it right. Slapped the 1406 on the 304, no spacer and correct...

So I just got this 85 CJ7 with a 304 amc in it. This is my first amc engine, and first one I've done really anything with. I know enough about engines to build them, but not enough to hook them up really. So my problem is that recently I replaced the cam and lifters because I had a flattened cam...

I just installed a new precision brand mechanical fuel pump in my 1989 Jeep YJ Islander. It has a Weber 32/36 dgv carb and inline 6 cyc engine. When I start the carb is filling up with gas and running out the overflow tube. Some background: Jeep was stalling at stop lights and slow...

Hello everyone! I just recently purchased a 67 CJ5. All things considered it's in pretty great shape. I do have one big issue right now, though. The manual choke cord is not working. I tried to film a video so you could hear what it sounds like when giving more gas than idle and it chokes out...

I've got an issue where when I try to start my car, the carb fills up and spills gas everywhere....So the history. I'm in the midst of putting on the old carter 2 bb carb that came with the jeep. I previously removed it and installed a motorcraft 2150 and did the nutter bypass which worked...

Hey guys, first post so bear with me. I have a 1977 CJ5 with inline 6C 4.2L engine. The body is in great shape, but i'm having some motor issues. It starts and runs, but backfires very often when I give it some gas. The muffle is "footballed" out so I know i'm replacing that ASAP. I've been...

First time poster, long-time reader of the site. Had to make an account because i couldn't find anyone else with the same problem. Background: I bought my '87 YJ from the original owner. he had a brand new Carter BBD carb put on it months before he sold it. I performed the Nutter bypass, and...

Hello. I have an 89 YJ with the 4.2L. I bought it about six months ago and have put all new suspension on it, fixed the frame, and so on. I left the engine till last because its not my strongest area to work on. But anyways when i bought it it had the carter carb and the emission parts removed...

Hey guys, currently rebuilding the holley 1850 that is in my jeep. Got it all apart and have a few questions. Specs on jeep: 304 V8 long tubes dual exhaust Holley 1850 carb 4 speed (if that matters) Truck sat for a decade and I def found some gunk in the carb so cleaning it. Question 1: Has...

All I've pulled the carb and looking to rebuild myself. I've never done a rebuild before and need help from the experts. First, what all needs to be removed before immersing the carb in solvent? Second, what should be reused and what should be replaced? Do I need to replace the electric...

89 YJ 4.2l Weber carb. nutter bypass, ignition upgrade. i believe a 4.0 head. I am losings highway power. I was able to run 70 mpg no problem in 4th gear with 35" tires. i have 3.07 gears. recently i made a 40 mile trip and couldn't get over 70 down hill. I have done compression check, and had...

My 1988 wrangler seems to be running too rich- you can smell it in the exhaust, and when I floor the gas while stationary the engine stalls. Ive got an edelbrock 1406 carb, and ive tried adjusting it but if i turn the screws any leaner, the engine starts to sputter and die. Vacuum is around...

I am new to owning a a jeep. Just bought a jeep that has been sitting for awhile. I need to know what carburetor was stock on this jeep. I think that someone put stuff on here that isn't supposed to be on it and messed it up. How do I find out information on what parts are supposed to be this jeep?

hi ive looked around and maybe some one could point me in the direction of the right post or answer some questions. iv got an 89 wrangler with a weber 32/36 carb its about as simple as it could get it runs great most of the time but iv started to notice some issues with the engine and seeing as...

I'm fixing up a '78 CJ5 and for the life of me I can't find the name or the part online to replace. If you lift the hood and look at the carb it will be in the back left corner of the carb. It's almost like a fuel line, it comes off one spot in the carb and bolts into the engine block and the...

So i just got done installing a motorcraft 2100 and a new air intake on my 86 258 t176 i havnt done the nutter yet. I bought it all from gronk the guy on ebay. Ive seen some complaints about him I didn't have any problems id buy from him again. But anyway. Im down to fine tuning it. Ive fond...

I searched and cant really find what my problem is. I got a rebuilt motorcraft 2100 for my 86 cj straight 6. I bought a carb kit from that guy off ebay gronk. He sells a good kit and so far the hardest thing to do was come up with a way to remount the throttle linkage (I felt like i was building...