Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 17 Results
  1. WK2 Grand Cherokee Forum
    Welp...... my 2012 Grand Cherokee with a Hemi, 112k miles, only synthetic oil and changed every 6-7k started " ticking " unusually loud the other day, the shop said its definitely a lifter issue and most likely the cam needs to be replaced too in his experience, so now I guess I need to decide...
  2. TJ Wrangler Technical Forum
    I've been reading up on caster and what it should and shouldn't be set to. I understand factory is at 7 and that with a lift and larger tires, it should be less. I recently lifted my jeep and netted about 2-2.5" lift and have 265/75/16 (~32") tires. The alignment shop printout reads that my...
  3. YJ Wrangler Technical Forum
    I have an 88 YJ 4.2 automatic 2.5 inches of lift and 31 1050's that has a stuck lifter. I plan on replacing them in the next week or two. I figured since I'm going that far into the engine might as well replace cam and timing gears/chain. I'm on a budget so those parts will probably tap me out...
  4. TJ Wrangler Technical Forum
    Hi all, Looking to do some upgrades to my Jeep. Was looking for insight if anybody could tell me about how much HP and Torque gains I may get with just looking at this. I have a 2001 Jeep Wrangler Sport, 4.0 6 cylinder, flowmaster 40 muffler, 2" body lift sitting on 33" tires. Engine is...
  5. YJ Wrangler Technical Forum
    Hey guys, been a while and I've made a few updates and had a few problems since I spun a thread last year. Here's my current query : My jeep jumped a couple teeth on the timing change and I can't seem to get solid compression back. (I also helped the problem along by moving the cam and the...
  6. XJ Cherokee Technical Forum
    I have a 96 Cherokee country. 4.0 straight 6. Automatic. The beginning of this year I enjoyed that stalling out issues of the crankshaft sensor, until I replaced it, along with the distributor and a new fuel filter. I had the transmission rebuilt also and a couple weeks ago replaced a freeze...
  7. KJ Liberty Forum
    So i have a 2002 jeep liberty 3.7 automatic 4x2, I have it since 2 years ago, no problems at all until now, I was on the street and the engine die at a red light stop, I try to star it again and after a couple of minutes i was able to do so, i was able to drive back home but right before i...
  8. WK Grand Cherokee & XK Commander Forum
    i have a wk gc 5.7 hemi and im just looking for suggestions on an aggressive cam for it. im looking for a sweet sounding idle but i need it to be able to be driven daily so i cant go too aggressive.. can anyone post links or maybe a soundclip or youtube video thanks to anyone who is of ne help
  9. XJ Cherokee Technical Forum
    So my XJ has started doing a funky thing, like they do... Sometimes, when I hit a bump on the road, the engine cuts out for less than a second. It's just a quick skip. It also sometimes does this when accelerating from a dead stop. I get up to about 1000 RPMs, it skips, and then continues like...
  10. ZJ Grand Cherokee Forum
    It seems where ever i look there are no performance cams for a 98 4.0 GC. Why don't they have any? Or am i looking in the wrong places?:drool:
  11. XJ Cherokee Technical Forum
    2001 xj with basically a stock engine Im looking into a bigger cam, found the one id like and i have a few questions. http://www.summitracing.com/parts/CCA-K68-239-4/ It says No for computer-controlled compatible, look at the applications it says it will work in a 97. What do i need to do to...
  12. Jeep CJ Forum
    Hey everyone, I own a 1985 CJ7 inline 6 4X4 jeep. I am replacing the fuel pump and am having some problems. I removed the old fuel pump and am trying to install the new one but I think that there is supposed to be some kind of a spacer between the block and the fuel pump itself. The lever on...
  13. TJ Wrangler Technical Forum
    I have a 2005 Jeep Wrangler Unlimited Rubicon with (aside from suspension and wheel/tire/brakes upgrades that I have) an AEM cold air intake, JET ecu, and a Magnaflow catback exhaust. I was thinking of getting headers, but was told if it's power I wanted to look at stroke kits, and check out 505...
  14. Engines & Drivetrain
    I have a '99 with the 4.0. I have no idea what im looking at when looking at cams and pistons. Its not as easy as quads lol. Can anyone tell me what gains I would get, if they would give a nice lopey sound, and if they even work for my engine. I hate to ask so much but I have no idea what I...
  15. Engines & Drivetrain
    I have a basically stock '99 with the 4.0 and Im wondering if it would be worth a cam upgrade when I have my top end redone. Thinking of having my valves redone and been thinking of redoing the cam, rockers, rollers, and lifters and anything else needed with a cam install. Not really sure what...
  16. XJ Cherokee Technical Forum
    Hey, Im replacing my 96 4.0 with an 04 4.0 and I know I gotta use all the old intake and external stuff, but is the cam different enough to have to swap it too? through oreily there are 2 diff part numbers, but all the cam specs are pretty identical? Thanks, zack
  17. TJ Wrangler Technical Forum
    my engine light was on the code is for no cam signal at PCM i replaced the sensor and the light came back on what should i do please dont tell me its the computer
1-17 of 17 Results
Top