Search Results for ‘bushings’

I just installed a set of Energy Suspension body mount bushings on my 05 LJ because the factory bushings were shot and I was putting N-Fab RKR rails on the body mounts. I had a bit of a fitment problem, and I'm going to call ES and ask about it tomorrow, but I am curious if it's a known thing...

I need some advice in trying to diagnose this PITA clunking sound. About a month ago I started hearing it from the driver's side whenever going over uneven surfaces. Got under her one evening and everything felt nice and tight. Removed the sway bar completely and the sound was gone. I read on...

Hello everybody, I need some advice, hope someone can help on this one. I bought my 2008 Jk Wrangler last year so It has some wear and tear. I realize that when driving on the smooth road I can go 40 or 50 MPH with no problem, but as soon as I go over a bad piece of road the wheels start to...

I'm looking to replace my '05 Wk front sway bar bushings and have realized that since 2005, there has been an update on the bushings and brackets. I believe that: 2005-2006 Wk's had the 30mm bushings with the 'flat' brackets. 2007-2010 Wk's had the updated 33mm bushings with the new center bead...

Good evening all, I have a 91 Wrangler that I took out the other day and I lost the front body mount on the trail that goes between the body and the frame just under the radiator. A buddy of mine says Jeep told him this part is out of stock and no longer made... I'm thinking either: junk yard...

Often times the bushing on the front axle will wear out over time, this simple upgrade will help restore a nice ride! Available from your favorite retailer. :highfive:

Hello all and thanks for checking out my post. I have a 2000 Wrangler which currently has a 4" rough country x series lift installed. Unfortunately this lift has the older style Rough country adjustable control arms which are black on black with no locking nut on the adjustment. It seems...

I am looking for replacement stabilizer bar bushings that mount to the frame. What's the best brand for rubber bushings? I've seen blue moog ones that say thermoplastic, how exactly are those different from rubber bushings? Thanks.

Hey Fellas. I'm brand spanking new to the forum and just bought an '08 Limited WK 4.7 4x4 with 56k miles because my '08 Acura TL-S's engine exploded. Long story. And, furthermore, sorry that this post is so long and detailed - you can skip to the last 2 paragraphs to get to the gist. Either...

So I figured out that I have worn control arm bushings on my lower front CA's. There is enough movement that I feel the front driveshaft angles may be pushed to the extreme and there is some binding going on. Is there any reason I can't or should not remove the front driveshaft to reduce...

Hey guys, new to the Forum so bear with me. just got a 2005 Grand Cherokee used and have only had it for about a week and im already hearing and rattling/clunk-ish(more rattle, like something is loose) noises from what i believe both the front and rear suspension. im new with Jeeps and am...

I find myself at beginning a new project, my jeep. Got a 95 red jeep from an acquaintance for $2,500, under the hood was decent, frame was a bit worn, trail damage visible, but overall a decent running vehicle. The jeep came with a 3" body/2.5" suspension lift added to it, along with 32" tires...

Hey guys, easy question. How can I tell when all my greaseable bushings up front are full? I've searched and understand where/how many bushings I'm looking for. Just unsure of how to tell when they are sufficiently greased. Thanks in advance! P.s. first post, purchased the TJ last week and...

Need to change out my Rear Upper Control Arm bushings, on my 2000 WJ AGAIN For the forth time. Looking for experiences and life expectancies with different brands of bushings. Mopar, Dorman, Crown "I know are crap", and others I can't think of. Btw I hate this control arm, but at stock height...

I'm a novice wrencher to say the least. I can do most repairs if I follow a manual or writeup but I've always struggled with suspension. Half of that has to do with having the space and right tools to work with. But this weekend I was pleasantly surprised that $10 and 2 hours of work solved a...

I'm looking for a little help as I have tried everything I can think of to solve this problem, but nothing has worked. I swapped my 2000 TJ Sport for a '04 Rubicon about three months ago and have been steadily building it up since then (the details are in my profile). I'm now getting a pretty...

I am trying to get my recon permit in Hawaii. They have a 3" body lift limit. Unfortunately, they count the 1" bushings as part of the body lift. So I need to remove 1" of lift from my CJ in order to get my recon. My question is this: Would it be okay to remove the bushings? They are...

Hey everybody i just bought some superflex control arms and some new 3.5 inch full packs. I think i need to replace the bushings but this would be my first time dealing with bushings. Best brand and cheapest place to get them? is it still possible to get RE items? thanks and heres some pictures...

So it appears the bushings on my trackbar are going out on my 2006 TJ. I have the aftermarket Adjustable trackbar from RC and every once in a while i get a pop sound when turning slow and steering feels really loose. At high speed sometimes it feels like a patch of ice was touched. I looked...