Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 130 Results
  1. Jeep CJ Forum
    I have a 1979 CJ7 304 (now a 360) 4SPD that is new to me and I need some input from the collective. The gap on these round bushings on the transmission mount don't look right. Is there a piece missing here, do I just crank on it until the bushings pinch the bracket? Also, I added a picture of...
  2. Jeep CJ Forum
    I'm replacing the worn out rubber bushings on my CJ7 with some new prothane bushings from energy suspension. In the instructions, it says that the old metal shell from the rubber bushings must be removed but it doesn't say anything about replacing it with a new one. Do the bushings go straight...
  3. Engines & Drivetrain
    Hi, This is actually my first post on the Jeep Forum. I am having an issue with my transfer case bushing. I was able to get the bushing onto the knob, but cannot get the ring over the plastic piece if that makes sense (excuse my lack of knowledge here). Any tips? I've attached a picture to...
  4. TJ Wrangler Technical Forum
    The shift lever on my 2006 TJ X Auto 4.0 went loose this evening. I found treads about the bushing at the transmission, but the cable was disconnected at the shift lever on mine. The bushing was cracked and no longer securing the cable. I cannot find a part number for that bushing - does...
  5. Rancho Suspension
    For the last three years we have been testing our D2 bushings in Moab Utah on rental Jeeps, and from coast to coast on trails like the Rubicon, Rausch Creek and other trails along the way. The toughest testing out there. The results? A bushing that absorbs up some of the toughest trails out...
  6. Vendor Display
    For the last three years we have been testing our D2 bushings in Moab Utah on rental Jeeps, and from coast to coast on trails like the Rubicon, Rausch Creek and other trails along the way. The toughest testing out there. The results? A bushing that absorbs up some of the toughest trails out...
  7. WK Grand Cherokee & XK Commander Forum
    Hey guys, I'm wondering if other bushings are prone to failure on these rigs besides the notorious front differential bushings. For example, do the transmission bushings go out regularly? The reason I ask is I get a "clunk" at very low speeds, like stop and go traffic, whenever I press the...
  8. TJ Wrangler Technical Forum
    Hello everyone, Yesterday, my shifter disconnected from my transmission (42RLE) in my 2006 LJ. After hopping on WF this morning, I went to O'Reilly's and picked up the Dorman Help! #14041 kit of bushings. It supposedly only fits up to the 2005 Wrangler, but I picked it up anyway. The...
  9. Rancho Suspension
    We have launched our NEW adjustable control arms (upper and lower) with our new D2 rebuildable, self-centering bushings. These bushings will help reduce noise, vibrations and improve handling. Made with heavy duty DOM , they will hold up to the abuse you throw at them! They are now available...
  10. WK Grand Cherokee & XK Commander Forum
    Had a grinding noise in the front for a while now and can't figure it out. It only happens in turns (more than one wheel turn) and while I'm accelerating. I have a sneaking suspicion is somehow related to my diff bushing since it only happens under acceleration and the front diff bushing doesn't...
  11. JK Wrangler Technical Forum
    For those of you that have replaced the bushings on your door hinges, what kind of fit have you observed on the replacement bushings of various types (plastic, metal, etc.) and from different suppliers? What did you purchase and who from? Were they too loose, too tight?
  12. KJ Liberty Forum
    Hi Guys, The other day, when I changed from 4WD to 2WD on my liberty, I felt it a bit loose, and after this change, the shifter kept loose, like if it was "disconnected" and I wasn't able to change to 4WD anymore. I was reading a couple of posts on this forum regarding the same problem mostly...
  13. WK Grand Cherokee & XK Commander Forum
    I replaced all three isolators around 11/12 months ago after I started getting the P,N,D clunking noise. I was just up under the Jeep today and noticed the most expensive of the three (front axle housing mount) is already on its way out. The "rubber" has started to rip within the bushing and...
1-13 of 130 Results
Top