Search Results for ‘broken’

so ive seen in a few threads and had the same issue myself. my clock would at most tick 1 second forward and 1 back, or just not at all. took it apart cleaned terminals, tied 12v to it directly, nothing. got to probing with multi-meter and noticed 1 of the capacitors had no voltage across it...

My 1997 ZJ has ABS, the ABS light doesn't come on when I start it up. I figured all was well until I recently had to brake really hard but I got no ABS. I checked the fuses and they are all good. Any ideas on where I should start next? Thanks, guys.

Hello, I have a 1997 Wrangler TJ I4 and not too long ago I recharged my A/C. I was just recently driving to work and a weird burning or maybe chemical smell came out of my vents when I was in the 3rd setting for A/C. Now for some reason 1,2,3 setting for airflow do not work and it only blows on...

Please help, Name is David currently station in the DC area bought a brand new Wrangler Rubicon, jeep didn't even have 100 miles till I notice and its making high pitch metal noise at various speeds with little pressure applied to the throttle from 1K RPM to 1.5K RMP (10-15 mph and 35-40 MPH)...

So I had a broken cross pin in my back Diff, local shop said they would charge $89 an hour to work on it, rediculous! So I decided to get it out myself. The kit worked great for the cost id recomend it if you have this problem and don't want to shell out the cash to have a shop do it! problem...

I took my new 1995 2.5 4 cylinder YJ through some mud and a little bit of water the other day. On the way home I power washed the body and around the hood, not into the engine. It ran perfectly before I got home, but it then started running very sluggish and choppy, seeming to misfire and almost...

When I was shopping around for hood locks about 6 months ago, I thought why not spend the extra coin on a good, high quality, Mopar brand hood lock for my JK. Well, here I am, half a year later locked out of my engine compartment with an oil change due next week :thumbdown: I uploaded a video...

So, started pulling off the balancer like normal, and the balancer cracked off. Literally the center is still stuck on the crank, at this point I have no idea what to do. :brickwall If anyone can help that'd be great, this is gonna end up being a real pita.

I thought I would share my experience repairing the broken hood latch I had last week, after poping the hood too many times to unhook-rehook my battery up. Not many guys will probrably need this, but the two who will will appreciate it. First of all...for those who dont yet have a broken one...

my body mounts are breaking through the body because of rust. what should i do? is it worth to get it all fixed... or should i just sell the jeep because its not worth it..? please help :crying: :crying:

For the Northeastern USA fellows itching to get out and wheel, lets see some of your favorite pictures or youtube links from the beloved Rausch Creek! Whether they are parking lot shots, group shots, shots of trail carnage, lets see them all! :cheers:

my jeep xj over heated and shot antifreeze everywere when that happened the gauges still worked I turned it off and let it cool down and fired it back up they still worked fine I drove about 2 more miles and it heated right back up so I parked it (at a friends house) about 2 hours later I went...

I installed 37" tires on my jeep and unknowingly didn't upgrade anything on my axle so I tore apart my axle. When I drive my jeep I am getting all kinds of crazy vibrations throughout my entire vehicle. I feel it in the body and in my wheel. I know the problem is in my rear axle and I have a...

This broke while driving on the road!! I've only been off roading once and that was two years ago! Can I get this welded at a local steel fabricators or does it need to go to a garage. Any suggestions, money is kinda tight!

I recently replaced my A/C clutch and compressor but now there is no A/C and no heat. I checked the clutch and its spinning, the compressor is on, and the lines are cold so there's freon in the lines, and I checked the fuse panel and they're all fine. Idk what else the problem could be...

I know that the 2.5L are known to have problems with cracked manifolds. I have already replaced the manifold once, which was about a month and half ago, and now I think it is cracked again or has a blown gasket. To tell you the whole story in a few sentences, I took the Jeep to Silver lake sand...

I have a 96 Jeep Grand Cherokee (I know it's obvious because I posted here) The front passanger door and the rear driver side door will only lock and unlock manually. The remote and the interior lock switch work on the other two doors. The dealership wants to charge some crazy price to fix the...

i have 96 zj. i installed auburn ected locker front dana 30 . But since i changed my tires with 35x10.5x16 silverstone extreme 117 i broke my ring pinion 2 times in 2 months and i uninstalled the ected locker. İ think when it's working LSD ring and pinion couldnt resist LSD. İs there any idea or...

Hi guys, this is my first post. I've received so much good advice here for my 1988 Cherokee, but I couldn't quite find any info about this. I hope this is the right place to post, so here goes: 1. My wipers turn on at the last click on the multifunction switch. The one that says "Hi". They're...