Search Results for ‘bolts’

Hello everyone I am new to this forum Im looking to gather some information about bolt sizes for different applications and year groupings. for example what bolts are used to attach the hood? Type, size, pitch and quanity. What year grouping does this work for? If anyone can help please let...

Hi, I have a 94 Cherokee that runs great. However, the driver's seat is stuck in recline and it seems like the mechanism is shot. My brother happens to be working on restoring on a 95 Wrangler. He's replacing the seats and we were wondering if the Wrangler seats will work in the the Cherokee...

I installed my Warn M8000 on my TJ last night. I have the smittybilt SRC classic bumper and Smittybilt flat winch plate. Due to the extra size of the bumper over OEM I had to drill out two holes for the front two bolts of the winch. I ran the bolts thru the bumper, and the winch plate, into the...

I've been reading up on caster and what it should and shouldn't be set to. I understand factory is at 7 and that with a lift and larger tires, it should be less. I recently lifted my jeep and netted about 2-2.5" lift and have 265/75/16 (~32") tires. The alignment shop printout reads that my...

Yeah like the title says, hi, just finished a NV3550 swap on my '89. I got the transmission complete, aside from the bellhousing bolts and the mount bolts. I'm having a hard time finding what type of bolts those are that are needed, because the engine to transmission mount bolts are the same...

I've tried the local ACE Hardware, Home Depot, Autozone, Sears. Most of the people I talked to said they had never even heard of such a thing before. I need 2 flag nuts to stick inside the frame for my trailer hitch. The ones that came with the mount were cheap and needed to be cut out after the...

hey guys, got a slight issue but nothin big. bought a new bumper and it requires bolts through the frame piece from the backside. only issue is that the gas tank/tank skid is in the way. what im wondering is if i can simply drop the skid? or is the tank itself connected? if so is there an easy...

ive been reading that its recommended to replace all the track bar and control arm bolts due to improper sizing from factory. if i buy new teraflex arms and track bars does it come with new hardware? if not, is this northridge kit a sufficient kit...

My 1995 jeep grandcherokee is missin the top starter bolt ive been trying to find out the right size. Ive herd it is a 7/16 by 1 1/4" bolt but never got the thread type. Ive tried a 7/16 - 13 by 1 1/4. But its the wrong size. Ive tried dealerships, there useless and ive asked autozone but the...

Okay so I've been rebuilding my AMC 360 kinda slowly (past 2 years on and off) and im ready to finish it up. I lost the timing chain cover bolts and it's been so long I don't even remember what they look like as far as length. Does anyone have a diagram with sizes and placement or can anyone...

I need to know the sizes of all the bolts that connect the bellhousing to the engine block. I had them all organized, but during the rebuild they all got misplaced. I know the (2) on top were those annoying inverted torx bolts but I broke those off when trying to take them out. These bolts and...

Hey guys, in the middle of putting the beast back together after a head gasket job, and huduh! I forgot to document the bolt placement on the valve covers; some are regular bolts and some are extended for other things to attach to them, and I've no idea which should be where. Anybody got a bead...

I have an odd situation - I removed the front trailer hitch from the po. It used the steering gear box bolts for the driver's side. I bought new bolts since the ones on there were pretty rusted. With the hitch off, when I put the new bolts back in I can't get them all to tighten against the...

Anyone know the sizes (diameter, length, and thread size) of the central spring hanger bolts, the ones under the cab, not at the front and back. Two large bolts for the front springs, two large bolts for the rears. Was thinking about getting a few greasable bolts for these guys and wanted to...

When I last rebuilt my transmission, I had an issue when I got it back together. I thought that the Bolts that hold the Torque converter to the flex-plate were hitting the inspection plate. When it was in gear you heard a distinct clicking sound, it gradually got better and went away. Later on...

Ok I've been looking around my area and online for the bolts for my 97 jeep grand Cherokee seats, and i cannot find them... can anyone please point me in the right direction? Ive tried junk yards too and they dont have them, last parts place i went to said the bolts break easily so they dont...

Anyone know a good fix for rusted holes that the tranny pan bolts go into? I am in the process of replacing my ax5 5speed trans. The holes in my frame are rusted and wont accept the bolts back into them to secure the tranny pan. I'd appreciate any help/pictures you got. Thanks.

Hello all, I recently purchased a bumper/spare carrier combo, and the factory bumper (which was heavy on modification but light on proper technique) would not allow me to salvage the lower bolts. I got four new upper bolts with this bumper setup, but was supposed to reuse the lowers. I've...

While removing the heater box during my current rust repair project I managed to break 2 of the four bolts that hold it to the firewall. The bolts seems to either be glued or welded to the inside of the heater box cover. Anyone have any experience removing and replacing these bolts without...

Hey guys, I just install these Body Armor side guards (http://www.quadratec.com/products/12053_402_07.htm) to replace the crappy tube steps that were on there before, and they simply bolt on using the 3 body mount bolts directly underneath the doors. The problem is, one of the bolts snapped as...