Search Results for ‘block’

How's it going y'all! I've been capitalizing on this pandemic time to rebuild my Renix 4.0. Unfortunately, while pulling out the engine, I broke a sensor on the side of the block. I've been struggling to identify what it is. Seems like all of my Renix literature shows a sensor in this location...

Is this block garbage/warranty? I was about to bolt on the head/gasket and found these cracks in the webbing between where the push rods go, where the webbing connects the side of the block to the cylinder. I'm wondering if the machine shop didn't say anything because it's not a big deal, or if...

So, I took the head of tonight. It will go to the machinist tomorrow. The lower portion of the block is pretty nasty. I've stripped it down of bolt-ons and removed the freeze plugs and oil pan. (See pictures) My question is, can I pressure wash everything I see inside and out? Shouldn't the...

I bought this engine off of a guy on craigslist, and once I took one of the heads off I noticed that the block was cracked along the coolant passages.:( Any of you guys think that there may be any possibility of getting this repaired or is the block junk now?

Hi All. I am pretty bummed to say the least and hoping you guys can lead me in the right direction. My passenger side engine block broke due to motor mount failure. (See pic) was told that new engine is needed. I have so much time money and effort into this '93 that I need to fix it. Is a new...

I have a 2004 4.0L with 80,000 miles on it and the radiator just failed and the motor over-heated. It got hot enough to crack the block. It failed the block test @ Firestone and now they can't even give it the Texas State inspection until a new engined is installed. Firestone quoted $5,800...

I need to know the sizes of all the bolts that connect the bellhousing to the engine block. I had them all organized, but during the rebuild they all got misplaced. I know the (2) on top were those annoying inverted torx bolts but I broke those off when trying to take them out. These bolts and...

So, a couple months ago (been doing a lot of air travel for work), I was driving over our local bridge to my office @ 60mph and BAM, I Spy-Huntered all the cars behind me. It was about two miles to the office (no breakdown lane on the bridge), engine was running rough as hell, started making a...

First off...sorry to make another one of these threads Dont want the prestone kit because i dont want to cut my hoses. I don't want to pull the thermostat housing, since i recently changed all that out, and i would prefer to not disturb it. I did the most common flush i saw from the search...

Anyone, what is this hole on 258 block above the starter?

Ok I am going to try and explain this as best I can. Me and my wife just bought a 2004 Jeep Wrangler X everything pretty stock no mods to it yet. So we went out wheeling through some puddles with a friend and he got his cherokee stuck so I pulled him out but it was tuff I had to pull forward and...