Search Results for ‘bleed’

I've searched far and wide trying to find a solution to this issue, and while I found a few other people who also experienced it, I have not been able to find any solutions. Background: 1988 YJ 4.2L. Bought a few months ago as a project - needs alot of work. When I first bought it the previous...

Ok so my driver's side front brake hose developed a leak. I got the jeep home but unfortunately the master cylinder was empty at that point. I replaced the hose and bled at that one wheel, but after driving I noticed right away that my pedal is still quite squishy. I'm thinking that the...

XJ 88, 4.0 litre, 5 speed peugeout ba 10/5 tranny, internal slave. I have install: -Luk Clutch Kit (pilot, disc, plate) -Hydraulics (master cylinder, fluid line, slave cylinder) -Clutch Pedal bushings (no play) Before this, my jeep works fine, but the disc felt worn. I could shift all gears...

I just replaced the MC and the slave. Put the tranny back in and the transfer. Got everything hooked up bleed it some. Now when running it is hard to go into gear and if you try to put in 5th or reverse it grinds. Is this still air in the slave or could I have hooked something back up wrong? If...

So my wheel cylinders in the rear were both hemorrhaging brake fluid when I stomped on the brakes. So after many miles of downshifting WELL ahead of stop signs and ignoring honking cars, I decided to replace the cylinders, brake shoes, and hardware on Sunday (must say, drums are a PITA!). Bled...

Hi all, This is my first post on here... Hopefully someone can help because my new CJ5 is not going anywhere until I figure this out... I purchased a 1978 CJ5 a week ago. I had mushy brake symptoms intermittently, the only way I could come to a good stop was by pumping the brakes to build up...

So Thursday I am on the way home from Maine in Boston traffic 100 degrees and one of my front calipers starts making a squeeling noise, which comes and goes. So on Saturday I take the fronts apart and find that the passengers side front caliper was sticking and wore the pad a little funny so I...

I can't seem to find where to bleed the clutch I have the hanes repair manual and it isn't really helping me much. It says to bleed the clutch untill there isn't any air bubbles but yet it really doesn't say where the thing is to bleed it and I'm trying to find where to bleed the clutch and how...

can u guys help me out my jeep i stuck and i dont know how to bleed it, i was talking to some people and, they all say thats the problem but they couldnt show me. can u guy help me out pictures would be great and what tool i would need thanks.

Hey guys, I'm new to the Jeep world and having a little trouble. I just purchase a 97' TJ about two months ago. Today when I was driving it home the clutch would allow me to press it all the way in (although too easily) and I couldn't shift into any gear. I think I need to bleed the clutch...

My 97 Wrangler TJ 4.0 has been having problems with the P/S. After wheeling for a while, the power steering seemed to get really weak, where I had to really struggle to turn the wheels. I replaced the P/S pump and when I first fired it up, i could easily turn the wheels back and forth. It...

I just got back from the dealer picking up my Jeep. They replaced the throw out bearing and the clutch with the new part number clutch. The squeal and the squeak are both gone. MY clutch does not feel like it did. I used to be able to just push the clutch in an inch or two and the clutch would...