Search Results for ‘binding’

For the past few weeks here in Michigan, we've been getting some snow :2thumbsup: On my way home, prancing over snow drifts, I came across a helpless Jeep Commander stuck, due to some very worn tires. My JK does weigh substantially less so I knew I was up for a challenge, but I was equipped...

Ive seen a few threads on this issue but felt it necessary to post this specifically to my vehicle. The front end of my 2006 jeep gc 5.7L V8 has a binding/grinding issue during tight turns. I've just replaced the front right wheel bearing and still the problem persists. The problem feels as...

i have a 96 jeep grand cherokee laredo 4.0. when i have jeep in full time 4 wd it drives great untill i get into a parking lot and turn the wheel to park or on any turn really, it feels like its binding up and there is a grinding sound like brake pads eating into rotors. we only drive it in 2...

I just had my TJ transmission rebuilt and got it back yesterday. Unfortunately I didn't go to a shop but a guy well known to build transmissions around my area. I got it home and everything works great. Gears shift perfectly. Reverse worked good. Except for when the Jeep reaches the normal...

1982 CJ5 Frame Up Inline 6 rebuilt from machine shop 4-speed T176 Clutch is really stiff. Broke bracket end off bell housing where z-bar attaches. Z-bar is perfectly parallel to the ground, but when viewed from above appears to be slightly off kilter from the brake pedal end to the bell housing...

So my throttle linkage is binding, when I depress the gas pedal it sticks at first and then when I let off it doesn't return all the way back. When I loosen the throttle linkage nut everything works well, but I know that the nut isn't supposed to be backed off the linkage so it isn't even...

Hi, I have a 2005 4.0L Jeep Wrangler 2dr Unlimited with 6 speed manual transmission. Recently, when coming to a stop, right around 3-5 mph the transmission will shake / shutter / vibrate for a second, then the car is stopped. It sounds like it is something mechanical binding right under the...

I have an 07 Sahara JK. The truck was lift with a 4" RC lift, dual steering stabilizers and I threw away the ****ty RC shocks and went with Bilstien's. Recently however the truck at low speeds and at a stop binds up when turning left. The bind is just at the begining of the turn and after...

So, since my Jeep is down in Dallas until September, I thought I'd make my time useful and plan things out for my Jeep build. In the process, though, I remembered something that never did sit right with me. I have a 2000 TJ with the 44 in the rear, and one thing I always thought was a bit odd...

I'm posting this for a buddy of mine who I didn't have an answer for. "When I turn the wheel all the way to the Left or right, the driver side wheel binds up and wants to pull the wheel back almost like having 4 wheel drive engaged on pavement. Axle u joints are new and all steering...

I recently installed 2" BDS springs, but I only gained about 1 1/2" of lift. I spoke with the dealer who I purchased them from and he mentioned that I need to loosen up my control arms and let the axle droop and then retorque them. He thought the control arms might be binding and that could be...

This is for a 2000 Cherokee XJ. When in 2WD and driving at any speed or turning, or in reverse, the drive train is quiet and smooth. When in 4WD and driving at any speed, straight..or in reverse straight, the drive train is quiet and smooth. When in 4WD and turning right of left on any...