Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 310 Results
  1. TJ Wrangler Technical Forum
    Does anyone know if you can direct swap a Cherokee XJ 1992 front axle into a wrangler TJ 2005? would the axle (right down to the brake rotors and everything) be a direct bolt it.
  2. YJ Wrangler Technical Forum
    I found a good deal on a set of axles out of a 97 F350, my question is how much of a hassle would it be to get these axles to fit under my 93 yj?
  3. Jeep CJ Forum
    I have a 85 scrambler that needs a new rear axle. It's stock but can't read tag. I think it is an AMC 20. If I can't find one local, would there be another axle that would work?
  4. Jeep MK Compass & Patriot Forum
    I was driving my Jeep one day and got my self stuck in a ditch and did some front end damage. I recently replaced the subframe, front right axle, front pads and rotors, front right caliper and brake hose, both front control arms, both front outer tie rods, both front sway bar links, and both...
  5. Jeep CJ Forum
    Any interest in parts from a 1955 cj5? I have both axles, transmission, transfer case with warn overdrive along with all 3 shifters. Also have the frame and leaf springs. Anything that is not sold in the next few weeks will go to the scrap yard. Let me know what you want and I will get you a...
  6. ZJ Grand Cherokee Forum
    [Edited because I have a Dana 35, I'm dumb] Old faithful has left me stranded for the first time in 190k miles of reliable service. My rear end blew up. I haven't opened it up to see what happened (that'll be another post), but it's safe to say my rear is not going to be salvageable. I'm going...
  7. ZJ Grand Cherokee Forum
    Ok so I’m stumped. So I bought a Zj and I lifted it 3in. I changed the all steering components. And track bar. I know there can be death wobble but hear me out. Can there be death wobble when all wheels are jacked up? I never knew I had this problem until I took it on the highway. . I’m driving...
  8. Drivetrain
    I have a Dana 44 originally out of a 1970 postal jeep. 3.73 with trac-loc according to Data info. p/n: 603132-2 I bought it several years ago for my cj but decided to go another route. I do not know anything of its condition other than the visuals. I don't want anything for it, just seems a...
  9. Engines & Drivetrain
    Recently the front driver side caliper locked up and was smoking badly. I Decided to try to rebuild calipers but caliper still locked up. Purchased remanufactured caliper with new rotor and pads. After all of the brake parts were put back on Jeep and brakes bleed on all four wheels, I attempted...
  10. KJ Liberty Forum
    I'm hoping you guys can help me figure out my part mystery. I've got a 2006 3.7 with the 3.73 front diff. I went off roading with some friends and cracked the passenger side axle housing that mounts in the diff. That axle housing has a flange on the end and theres a bracket that runs...
  11. JK Wrangler Technical Forum
    To the friendly Jeep community, I am a long time member but mostly a lurker. I have a 2008 Jeep JK Unlimited X with manual and it has 130k mostly highway miles on it. I love this vehicle to death but on Christmas evening, I ran into an idiot who did not see me in his driver side blind spot and...
  12. Jeep CJ Forum
    The surface I drive on with the least traction is icy roads. I'm making safety more of a priority these days.. I want to choose my differentials based on the least traction situation (ice and/or black ice). I'll start by saying the appropriate TIRES are probably the most important factor. I get...
  13. Jeep CJ Forum
    Hi! Just bought my first jeep, 78 CJ-7, trying to fix brakes. Guy I bought it from said he swapped the axles for '80 axles but from what I'm seeing I think they might be off an '81 or '82. Pretty sure he painted it cos I can't see any markings/letters on the differentials(?). Is there any way to...
  14. WK Grand Cherokee & XK Commander Forum
    Short version: If your rear pinion seal is leaking, change the diff fluid when you replace the seal Looking for opinions on if I actually need to change the rear end and if so, what do people suggest? Long version: The ring and pinion has always been loud since I got the Jeep with around 87k...
  15. YJ Wrangler Technical Forum
    Hello everyone, I used a 3D printer to make a seal puller There is enough clearance to change the seal out without needing to pull out the other half of the axle, which lets you do it without having to take the hub apart and drain the oil Just thought I’d you all know that it IS possible
  16. Jeep CJ Forum
    Is an AMC 20 rear axle with a one piece axle shaft conversion, better than a Dana 44 axle with the same rear gearing? i have access to both, but I can't decide witch one I want to install. The Jeep is just a cruiser with a really powerful motor for its weight. I'm scared I'm gonna grenade the...
  17. Engines & Drivetrain
    Hello, My 04 WJ has been making a small clicking noise in the front end for awhile, sounds like the driverside. I have replaced the drive CV axle hoping this would be the solution, unfortunately it was not. I went ahead and replaced my pinion bearing on the driveshaft and still did not solve. I...
  18. TJ Wrangler Technical Forum
    Well it seems that my Jeep's (97 TJ) issues and repairs have gotten over my head. After finally getting the fuel system, battery, starter, and other small issues resolved I thought I finally had a running Jeep again. I decided I should do a full fluid change out since I didn't know when the...
  19. ZJ Grand Cherokee Forum
    I have a 97 laredo and began to hear & feel clicking sounds (moving in a straight line) in the front. 6 months ago, I had the front axles & hubs replaced and everything was working well up until a week ago (with the click sound). I jacked up the front and put on jack stands to spin the wheels...
1-19 of 310 Results
Top