Search Results for ‘axle bearing’

Ok so I’m stumped. So I bought a Zj and I lifted it 3in. I changed the all steering components. And track bar. I know there can be death wobble but hear me out. Can there be death wobble when all wheels are jacked up? I never knew I had this problem until I took it on the highway. . I’m driving...

My mechanic tells me that one of my rear axle seals is failing and differential fluid is leaking on to the wheel. He said they may need to replace the bearing as well. This is way above my pay grade. He estimated $300-500 for the job. I looked at rockauto.com and the parts are only about...

While installing new bearings onto new 1-piece axles, I failed to notice the inner race was no longer supported while pressing, resulting in bearing damage. I was grinding down the inner race, trying to thin out the back side just enough so I could finish splitting it with a chisel, when I...

I have read so many threads and posts about how there are two different axles on 97 grands. A 35c and a 44a. I have the tow package v8 4x4 limited and its definitely aluminum differential housing but when I call the parts store or look online....... well........lets just say I had to write this...

Whose got a good tip for freeing up a stuck axle nut. This thing is REALLY stuck. Almost certainly hasn't been removed in the 23 year life of the jeep. Soaked it in liquid wrench and WD-40, tried a breaker bar, tried a breaker bar with two people, tried a breaker bar and a 3ft steel pipe with...

I noticed a steering wheel wobble yesterday when I was driving, but only when I was making a left hand turn. I put the front end on jacks today and checked out all the linkages for worn parts but everything seems tight to me. The only odd thing is that when I spun the tire I noticed that my...

Current situtation: -Jeep has 197X narrow trac AMC 20 with 3.54 Trac Loc currently installed with spun axel that has the nut welded. -Jeep front end is 3.31 open. -I have the original wide track (3.31 open) with welded spider gears and spun axel that has the nut welded. Plan: -To let a mechanic...