Search Results for ‘ax5’

Hi I have a 1995 xj 2.5l with an ax5 transmission and two of the 3 holes on the bottom of the transmission where the mounting bolts go have lost their theads. Can anyone tell me what size the bolts are so i can buy the correct heli-coil size to fix them. Thanks

Very odd situation here. 2000 Cherokee Manual AX5 transmission. Has new main shaft, counter shaft, new bearing, and seals in it about 700 miles ago. Recap- Jeep Broke down, I got it towed home, after getting it home I noticed the shifting was all sorts of messed up and it wouldn’t let me put...

I have a 95 yj with the ax5 I can shift through all the gears and all but once I shift into 5th there is no acceleration after that it will hold a speed of about 45mph .. Anyone have any suggestions, I know 5th gear is a common problem in the ax5

Will be replacing clutch soon and would like to do it all while I've got the transmission down. I can't seem to find a new flywheel listed anywhere...

I recently ate up my AX5 which I've read many places isn't abnormal. I own a 1994 YJ with 4" Suspension lift, 2.5l 4 cyl with stock Dana 30 and 35 axles. I'm looking to pull an AX15 from a junkyard tomorrow, but before I pick one to yank out, I wanted to see if anyone here has any experience...

Hi, I have a 1991 Wrangler 4 cyl. 5 speed. I replaced the clutch due to it blowing out. The jeep ran fine for a few months then on the way home I had some noise sounding like metal on metal. I started to slow up and a loud bang happened and lost all gears. Had the jeep towed home and come...

I have a 95 2.5L 4 cyl. with an AX5 transmission. Starts fine, no problems while idling but when i go to put it into gear the shifter feels stuck and won't go into any gear. Clutch pedal feels really loose. Flushed the fluid, changed it with synchromesh but still nothing. Are the synchros shot?

First time trying to rebuild fifth gear. Lost fifth gear going down the freeway, no, it is not the C clip. Took the transmission apart. It will not shift into fifth. It will go into reverse after removing and reinstalling the gear but it still will not shift to fifth. We removed all the gears...

my 94 cherokee 2wd, AX5 when i stopped then started to go again it moved 2 feet before the back tires locked up i could go back 2 feet then it would lock again an so on will be taking apart soon

Ok so i have a 95 YJ 2.5 with 150000 miles on it that i've owned for almost 2 years now. I do wheel it and have fun but i also take pretty good care of it. Recently 5th gear has went out and i pulled the transmission to find I had broke almost all of the teeth off of 5th. Not wanting to pay...

Hi all, Originally thought this may be a clutch replacement issue, but now I'm not so sure. With clutch engaged, in neutral...I hear a whine that travels with RPM. Not too loud but you can definitely hear it. It goes away when clutch is disengaged. Sounds like a power steering pump starved for...

I have a 95 YJ (2.5L with AX-5 and about 132k) that has a couple problems. First, the speedometer died back in February and despite changing the VSS and the speedo with one from another Jeep, it still doesn't work. Tach is fine, speedo is not. Then, about two weeks ago, 5th gear died on me...

hello all, I have a 1996 jeep Cherokee with a 2.5 4-cyl, (W/135,xxx.) 2wd manual 5-spd (ax5)?that just went out. I'm looking for a 4wd ax5 to replace it with. I've searched the forum all day(found a lot of useful info) but still need to clear a few things up. What years would interchange with...

I have a 98 Wrangler Tj I need a trans for. I've been looking for months for on and cant find a reasonably priced one. Can someone on here direct me to where I can get on? Thanks - James

Anyone heard of a 5 speed manual getting hot on the highway? I took the shift boot off and it feels like a furnace coming from the trans.

My 95 yj was making a whirring or whining noise, and one day, crossing an intersection quickly, it popped and jumped. When I put it in 4hi, it drove without the popping, making me think the chain is worn in the tcase, and by equalizing stresses between both front and rear axles, it was less...

ive got a 98 tj. i'm finally replacing my 2.5L and ax5 trans (after i blew up my 2nd ax5 trans). my question to all of ya'll, i bought a 4.0L out of a 98' tj with wire harness and ecu. and bought a NSG 370 6 speed trans out of a 05' jeep lj. is there any issue that i would have mating the engine...

Hi, so typically I skim through these forums and work off of that to fix up my jeep problems but I'm kinda at a loss. First off my baby is a '92 YJ with an AX5 Tranny 5 speed Manual 2.5L engine... I recently finished upgrading my clutch system up to a '94: '94...

Hello everyone, I swapped out an ax5 for an ax15 and the wire harness on the Jeep has a 4 pin connection for the reverse switch and there is only a two pin connector coming from the switch on the transmission. Does anyone have a diagram that I could use to connect the circuit up so my revese...

Hi, this is my first post to a Jeep Forum. I just wanted to relay some details about my 1994 YJ project. Last summer (2012) I found a 1994 YJ 2.5L 5spd for $2,500. Even though it had 230,000 miles, I couldn't pass it up! The transmission was noisy and wouldn't go into 5th, so I knew about...