Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Engines & Drivetrain
    So i have a 97 TJ with manual trans. When I bought it, it had a 4 inch lift with 33s and the stock gear ratio, which is 3.07. Driving with the 3.07s makes it feel like I’m starting off in second gear all the time and barely any power in 5th. I have done some research on regearing and most people...
  2. Engines & Drivetrain
    Need some rear diff help if possible: Ring gear in my dana 44 has lost some teeth, so now I know what's been making that horrendous noise. Bad news is I need to replace or rebuild...that is my question. Want to go as economically as possible as Jeep is advertised for sale. Bad timing to say...
  3. JK Wrangler Technical Forum
    I have a 15' JKU Rubicon, i have my bud sheet and i confirmed i have 3.73 gear ratio. I did some research (google/youtube) will a 3" lift, and 35" tires affect my daily driver? If thats the case, should i consider going for a project in changing to 4.10/
  4. TJ Wrangler Technical Forum
    I have a 2001 TJ 4.0 with a 4" lift, long arms, and 35's. I have a d30 in the front and a 44 in the rear. Currently running a 3.73 gear ratio. Should this be changed? I don't know much about this topic. Also, this is my daily driver.
  5. XJ Cherokee Technical Forum
    Hey guys I think I have 3.55 gears (no tags) on my DD 01 xj automatic with 4.5 lift and 31" tires, lots of street use very little off road use, anyways I was given 3.73 ring & pinion/carriers but they are for the d30 & d35 will the d35 fit in my 01 with the chrysler 8.25, also since both...
  6. TJ Wrangler Technical Forum
    What problems whould i face if i ran 33s on 3.73 on my lj?
  7. TJ Wrangler Technical Forum
    I have an 02 TJ 4.0L 5 speed Sport. I have a 4" suspension lift, running 31" tires, and stock gear ratios (3.73). I was just wondering if I need to regear for the tires? If it matters at all, when these tires are gone, I would like some 33" tires in the same width (10.50). Currently, I get...
  8. TJ Wrangler Technical Forum
    I'm looking into regearing my LJ. I am wondering what is the best cruising RPM that I should shoot for. Mainly mine is a DD and will see hunting trails. I do a fair amount of freeway driving as well. I'm running the 42 RLE auto (.69 final OD gear) on 305x55R20 (33x12's). OD is about...
  9. Engines & Drivetrain
    I drive a 97 TJ with a manual tranny, stock 4.1 gears and roughly stock sized tires. It looks like I'm going to get stuck swapping out rear ends and I was wondering if I should go ahead and get 3.73's this time around. I realize I would have to regear the front as well, but it looks like I...
  10. JK Wrangler Technical Forum
    First off I am brand new to Jeeps and lifts. I have a 2008 JK unlimited x with 3.73 gears. I am looking to lift it up and put some bigger tires on it. I called a local tire place and they suggested a Rough country 4" lift model 681S and 35" tires. Either Pro-Comp or Nitto. Currently I have stock...
  11. WJ Grand Cherokee Forum
    Ok guys, My front and rear axles are in need of a rebuild. Wheel bearings are shot and I think I managed to get water in them. So I’m on here posting yet another gear thread. I’m going to be spending $1431 to rebuild my axles and I want opinions and suggestions before I go through with it. I...
1-11 of 11 Results