Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 35 Results
  1. Drivetrain
    Set of complete OEM 360 heads Came with my 1984 Grand Wagoneer in a tub with other extra parts. PO pulled the OEM 360 and truck has a 401 now. Pics to follow this weekend If interested, PM me
    $500 USD
  2. Jeep CJ Forum
    I'm new to this forum and new to forums in general but definitely not new to making bonehead mistakes and later realizing I should have asked someone BEFORE I started a project. I want to start upgrading my old CJ-7 (which had a 360 in it when I bought it years ago) and thought I'd start with...
  3. Drivetrain
    Listing for my brother-in-law: Newly Rebuilt AMC 360. Roller Cam, Lifters & Rockers. New 650 cfm Carb & Billet Distributor. Only about 3 Hours on Rebuild. Can hear run. Currently installed in boat. Located in Steubenville, OH 43952 - Less than an hour west of Pittsburgh, PA. Asking...
  4. Engines & Drivetrain
    Does anyone know the clearance between the oil pickup and the bottom of the oil pan for an small bock AMC engine (304/360)? I am in the middle of redoing a 1979 CJ7 and decided to go with a 360 crate engine (all new components: Oil pickup, pan, etc). Originally, the jeep had a 304 but I...
  5. Jeeps For Sale
    Price lowered; inquire via private message. Thanks.
  6. New Members/Introductions
    I’m upgrading engine in ‘85 CJ7, T5 tranny, AMC 20 rear. 32” tires, 2.5” lift - - nothing too extreme. Plan to use it on moderate terrain, no severe rock crawl. I will go with either AMC 360 or 401. Appreciate thoughts on pluses/minuses of each. Also like recommendation for best intake...
  7. Jeep CJ Forum
    I've never restored any vehicle before let alone done any major work further than changing brakes. I have, however, grown up around a family that used to practice restorations quite frequently. Unfortunately, time catches up to us all and a lot of vehicles either collect dust or weeds now. Out...
  8. Full Size Jeep Forum
    Hello, A few weeks ago my oil pressure went up so high it blew my oil filter, and OPS. I would greatly appreciate some direction here. Here are the details and timeline; 1989 Grand Wagoneer with a 360 and 127k miles Back in October I noticed the oil pressure was very low (single digits) so I...
  9. Jeeps For Sale
    Zip27288ModelCherokeeKeywordsSJ, widebody, cherokee, quadra-trac, 360StateNCCityEdenPrice12000ShippingWill ShipPaymentCash Only1979 Cherokee SJ UNHARMED 109,xxx miles, 360, Auto, quadra-trac, original interior, seats carpet dash even the spare tire, original owners manual and Jeep "conservation...
  10. Full Size Jeep Forum
    Like the title says I'm having some issues. Cold starts just fine but after driving it for a while when its warmed up it likes to die and takes a while to start back up. It has a brand new distributor, deleted the points and installed HEI, cap, rotor, wires, coil, plugs, fuel filters, fuel...
  11. Jeep CJ Forum
    So I'm thinking about buying a 360. Runs and sounds great, but after 5-10 mins of idling it will shut off abruptly, no chugging or clunking, just shuts off. He just put a brand new Holley carb and intake on it, checked the timing and replaced the distributor with the same results. It'll start...
  12. Full Size Jeep Forum
    wellll, we decided after thinking long and hard about this engine thing, to go with getting a good longblock. I have done research on LKQ, ATK, and a few other places. I noticed a lot of complaints for LKQ, ATK and was going to get a 360 from them. Want to keep th:confused:is 87' Waggy stock for...
  13. YJ Wrangler Technical Forum
    Ok, so I've gone through and have seen several of the threads about swaps, but it's hard to gather facts from among the opinions. So I'm starting another. I know exactly (somewhat) what I have and am planning on doing. Just could use some expertise from some of you who have been there done...
  14. Jeep CJ Forum
    I have a 86 CJ7 Laredo. The current setup is 258, T176, 4.56, 35" tires. I'm looking for a little bit more punch and speed and realize that I'm currently geared too low for any kind of hwy speed. Im contemplating swapping to an AMC V8. I have a bead on a 304 and a 360. i trust the ppl with...
  15. Jeep CJ Forum
    Picked up a 360 to replace the 258 this weekend. I got four extra heads and a manual flywheel. I will be taking all of the heads to the shop for cleaning. I am pretty sure they are all good. I will be selling the extra four.
  16. Full Size Jeep Forum
    I have an 87 grand Wagoneer with a 2bl carb on a 360 that I am pretty sure is running crazy rich. It failed nox by 1000 points and is pretty much a gross polluter. New carb? Still smells like CRAP and still won't pass. I tryed leaning it out but I don't think I did it right because nothing...
  17. YJ Wrangler Technical Forum
    im currently in the process of swapping a amc 360 into my 87 yj, i have some questions on the conversions though, i understand the d35 will explode and i understand that the ax-15 is on limited time but what i need to know is in the hood department - ive heard you can use the stock passenger...
  18. Jeep CJ Forum
    I performed a compression check on my 360 because i have a bad miss at idle.Motor has 15.000 miles on rebuild, i've done an TFI upgrade,new wires,plugs,large cap-adapt and rotor.I'm having a hard time finding where the miss is coming from. I have a carter 4 barrel atop an amc performer intake...
  19. Jeep CJ Forum
    Hi, I have the 258 motor in my cj7 at the moment but I'm wondering if I should swap it for the v8. I like the way the v8 sounds more, and it would give me more peace of mind in terms of reliability because theoretically, 8 cylinders versus 6 means less work per cylinder. Assuming that price...
1-19 of 35 Results
Top