Search Results for ‘350 conversion’

Long time reader, first time poster. Happy to finally join the forum. I just bought this thing with the thought of just replacing or rebuilding the stock 258 that was seized by the previous owner. I also happen to have a spare small block 350 out of 72 chevy... I can throw that thing in there...

So I've never gone to forums for answers I've always had my own experience or my buddies help me out along the way, either way I want to give this a shot to see if it could save me time and money, I am building a 1992 Wrangler islander edition. It has a 6 inch leaf spring lift that I swapped...

Does anyone have some pictures of this swap? I just got mine done and trying to decide how to bend the shifters. I bought the wrangler AX15 tunnel cover, but it still needs some manipulation in order to get into 2nd,4th and reverse. I also had to hack off the cup holders on my center console...

Plan on doing a 350 swap on my 97 tj, i know i need to swap the axles along with trany ex.. but i was wondering what axles will work with the 350 n direct fit, like if i was going to buy a car for the donor parts which would work, i know dana 44 will but looking for something i can take off...

I am new to the Jeep world so I was hoping for some info! I know this is a widely spread topic full of opinions, but i was hoping to make a list of what i need to make this work. I currently have a 78 CJ7 with a AMC 304 that needs rebuilt. My plan is to pull this out and throw a sweet sbc350...

I have a 89 jeep comanche and was wanting to swap small block chevy and 350 turbo trans in it. When I bought it it had a Oldsmobile rocket engine in it, and I was wondering if the motor mounts for it would fit a sbc or if I'd need to buy new motor mounts. If I have to buy new motor mounts where...

So Ive been searching the forums and Google and seen lots of recommendations for the painless and howell kits for this swap but nothing that goes in to what is needed to wire these kits in to the jeep. I have emailed both painless and howell about what they offer for this swap and haven't heard...

Ok so I have a 92 wrangler 2.5 manual. And 4"lift and 33s. It has no power and I'm done with it. Im thinking I'm gonna swap the back axel first. Thinking the 8.8 I just have to find one with 4:10 gears. I've read a lot about the years but no one have me a strait answer. What would be the best...

Does anyone know of the best fit for alternator and power steering pump bracket and belts configurations for a 92 chevy 350 in a 79 CJ5? The engine came with the air conditioning pump and a serpentine belt. I don't want to use the air conditioning and want to configure the alternator and power...

Hi there, I have an 83 Scrambler that my father converted to a 350 years back. I have recently decided to get it back on the road; needs transmission, brake lines done, body work, and the fuel pump must be taken care of. Fuel pump burns out because (I think) it doesn't have enough juice, being...

I recently talked to a local mechanic (Chuck) about pulling my 4.0L so I could have it rebuilt, he said that long run I'd be better off swapping it for a GM LS 350 and a 5 speed which is what I would love to do, but it is pricey and I would like a second opinion before I dive into something like...

I have recently completed my sbc swap in my 1993 yj. Ok well not completed but close, I have a few issues first off does anyone know how to get the speedo working,Ii used the stock tranfer case with a 700r4 trans? Also I can not seem to get the parking lights and dash lights to work, all other...

I was wondering what all it would entail to take the 4.0 HO out of my 96 and put in a chevy 350 engine what all would need to be done and about how much would it cost

Hi... Wanted to see if anyone had experienced any of the same problems I am having. I just bought my 79 CJ-7 on Saturday, from about 45 minutes away from where i live. The guy i bought it from had never experienced any of the problems I had on the way home. After driving it about 30 minutes at...