|Topic Review (Newest First)|
|12-23-2004 07:40 AM|
Originally Posted by dllbert
they're the lights like Lexus, BMW, etc...
not a filament to light up, but it lights by igniting an electrical discharge between two electrodes in a capsule filled with xenon gas...
aftermarket kits are $500+...and most aren't DOT approved...
HID-like bulbs are just normal bulbs that are white/blue/purple...and go for as little as $5/each...
|12-23-2004 12:14 AM|
What is an HID bulb?
|12-22-2004 10:55 PM|
The two most important skidplates to have are for the gas tank and oil pan. This is based on the high level of vulnerability of both items and guaranteed likelihood that they will be regularly impacted by rocks, etc. on the trail. The gas tank is usually the item most often hit when offroading and thus really should be protected first. My gas tank's skid plate has been hit so hard so many times that it has paid for itself probably a hundred times by now.
On the other hand, my oil pan skidplate has never been touched by the rocks in eight years of rock crawling. But even so, it needs a skidplate from the first day since it only takes one rock in the right place at the wrong time to puncture your oil pan and likely ruin your engine.
Skidplates for other things like the steering box, control arms, etc. are great but should be installed only after installing the gas tank and oil pan skidplates. Yes the gas tank looks like it already has a skidplate but trust me, that sheet metal that serves primarily just to support the tank provides nowhere near the protection a true skidplate does.
|12-22-2004 10:45 PM|
Originally Posted by BigWaylon
|12-22-2004 10:01 PM|
I can't believe Oman hasn't come yet!!! When I saw this thread title, I knew Oman would post in that thread, but...
Hey Oman, where have you been?????
|12-22-2004 09:54 PM|
Originally Posted by djab
I installed the Skid Row, which actually bolts over the stock skid (most other replace the stock unit)...and it does not gain you any clearance or need a BL...
you've got the terminology a little off on the SYE...you don't "build" another SYE...however, you will probably need a longer driveshaft, and you can have yours redone locally for $100 or so...
|12-22-2004 08:42 PM|
Originally Posted by atxtj
|12-22-2004 08:06 PM|
|thejafe||Wait for Oman to get here... he'll tell you all about the HID's|
|12-22-2004 07:31 PM|
diveguy, check these out...
|12-22-2004 07:27 PM|
don't a lot of the gas tank skids require a body lift?
If one were to do... say a 3.5 RE SF lift and did an SYE at the same time would they have to have another SYE built down the road if they wanted to do a belly up?
|12-22-2004 06:35 PM|
Originally Posted by opiv
I wonder what's taking him so long?
|12-22-2004 05:30 PM|
It seems like the first skids to buy should be the front diff skid and the gas tank skid. Then you should get armor for everything else.
There's the batsignal - there will be boobie lights in here soon.
|12-22-2004 05:12 PM|
|CreightonRea07||definetly get an oil pan skid, Especially if you have a stock TJ, i hit mine this weekend pretty hard and wish i would have had the skid|
|12-22-2004 05:03 PM|
|MPowerM3||I thought you needed a SYE kit to do a belly up skid plate??? And I can vouch for a oil pan skid saw in use the other day|
|12-22-2004 04:42 PM|
Front Lower Control Arm Skids
I've now come across quite a few Jeeps with busted up lower control arms...It pretty much sucks to repair one I've heard
|This thread has more than 15 replies. Click here to review the whole thread.|