JeepForum.com - Reply to Topic
Thread: Front End Popping Reply to Thread
Title:
Message:

Register Now



In order to be able to post messages on the JeepForum.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid e-mail address for yourself.



Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
06-02-2018 04:44 PM
mukluk Never would have expected that... thanks for the follow up.
06-02-2018 03:00 PM
jjvw Does the Solid diff cover leave room for the track bar at full bump? Many have needed to either add bump stop or chop off the "d".

2003 Rubicon
06-02-2018 02:39 PM
PoeDunk I would like to thank everyone for the help.. Turns out it was my ratcheting locker.

When I tummy tucked the change in pinion angle apparently didn't let me get enough oil into the diff.

I put it up on ramps and added another 1/2 quart of oil and the pop is gone.

I have a new diff cover with a higher fill hole on the way (Solid)

Took a video with the cover off after i found the culprit.

https://drive.google.com/open?id=10a...VVh-T6uouumXDe

Thanks again for everyone that responded.
05-30-2018 02:41 PM
DavePippin could it be the steering components hitting the sway bar link bracket on the axle as the joint moves past it going back towards the driver? Look for scraping or scratching in that area (passenger side)
05-29-2018 11:59 PM
Shark_13 Maybe try disconnecting the drag link from the pitman arm, Jack up the front, and turn it by hand, might be able to feel what is binding or isolate if it might be the gearbox or not.
05-29-2018 11:42 PM
mukluk I don't see how that could in any way be caused by the Spartan locker. Maybe if it happened while the Jeep was actually moving, but not while sitting still.

When you're laying hands on all the steering and suspension parts, you need to feel for where the pop is coming from -- the feeling of the pop will be more pronounced near whatever is binding.
05-29-2018 09:10 PM
PoeDunk
Quote:
Originally Posted by jjvw View Post
It should be this easy, right?

2003 Rubicon
Yea, wonder why I didn't think of crawling under it and looking for what is popping....


I have laid hands on all the joints,, the steering loads up.. you can hear it, then bam the whole thing jumps.

The only thing I have heard is that it could be the locker.. (Spartan locker) Maybe changing the pinion angle would cause it to start popping? Less gear oil?



Edit: Sorry been under jeep again tonight and am frustrated..
05-27-2018 11:17 PM
jjvw
Quote:
Originally Posted by Shark_13 View Post
Have a helper turn the wheel back and forth, crawl underneath. Find the pop.
It should be this easy, right?

2003 Rubicon
05-27-2018 11:11 PM
Shark_13 Have a helper turn the wheel back and forth, crawl underneath. Find the pop.
05-27-2018 11:10 PM
jjvw
Quote:
Originally Posted by Renegade360 View Post
Can you get it to pop while sitting still? If so get someone to turn the wheel to locate the sound while you are underneath.

Quote:
Originally Posted by Shark_13 View Post
Get a helper to turn the wheel while you inspect underneath. Should be pretty easy to pinpoint
Can you get the steering to pop while parked and turning the wheels back and forth? Either with the engine running or not. If you can do this, then I don't understand why you and a helper can't locate the problem.

While your helper makes the steering pop, feel all the joints and connections.

2003 Rubicon
05-27-2018 10:18 PM
PoeDunk Also,

I had someone ask if i had a locker in the front.. Yes a Spartan locker, could this be what is popping? It has been in there for over a year...
05-27-2018 10:11 PM
PoeDunk Update

Still popping...

Things we did today,
Have had all the Tie-rod ends loose and tightened back at some time today.
Removed gearbox skid (in case it was pushing gearbox out of line)
Replaced the gearbox
Got rid of the drop pitman arm (Jerry should approve)
Rotated both knuckles while tie rods disconnected. The ball joints seem to be fine.
Checked the 12pt bolts holding the axles in.
Disconnected steering stabilizer.
Checked front trackbar bolts were tight.

Still binding somewhere, does it most often if starting from full turn towards driver, it binds approximately 3/4 of the way to full stop.

Tired now.. Gonna check control arms tomorrow, any further suggestions would be appreciated.
05-27-2018 10:02 PM
PoeDunk
Quote:
Originally Posted by mukluk View Post
Does it still pop when you perform the steering check with the front wheels off the ground?

To me it appears the most noticeable movement coinciding with the pop is at the driver's side wheel.

No it does not pop with the wheels off the ground. Only when the wheels "stick" while turning, mostly turning towards passenger.
05-27-2018 05:23 PM
Shark_13 Get a helper to turn the wheel while you inspect underneath. Should be pretty easy to pinpoint
05-27-2018 04:55 PM
biffgnar Pop when steering is a sign of a loose bolt somewhere in the front end. Things bind up and then eventually a weight shift happens which is the pop. I know you said you checked the torque but I'd do it again. In particular the trackbar.
This thread has more than 15 replies. Click here to review the whole thread.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome