|Topic Review (Newest First)|
|11-29-2017 12:26 PM|
|Fremen||I used https://appcar-diagfca.com/en/ and disabled it completely for my winter tires|
|11-05-2017 11:14 AM|
|IlanLCD||I used flashpaq, min. set to 24 PSI, the lowest possible.|
|11-03-2017 10:32 PM|
|Clarkyau||I did it on my CRD with Autoenginuity. took a bit of fiddling but I was able to lower the threshold to 10psi. If I remember correctly the setting was in the front control module.|
|11-02-2017 12:48 PM|
|keggles||You will need to get a tuner in order to hook up to the ODBII sensor and make changes or turn off the TPMS alarm. DiabloSport/SuperChips have them and I am not 100% if the HPTuner does it as well.|
|11-02-2017 11:54 AM|
How can I adjust the TPMS range or settings?
How can I adjust my TPMS tire pressure measure system, so when I run different tire pressures the alarm doesn't go off?
I know on the dodge ram and can adjust the setting and that 20% tolerance range with the scanner and the 4 digit pin, but how do I do it on the Jeep?