|Topic Review (Newest First)|
|05-22-2020 07:40 PM|
|devildog80||Looks like the horn might need to move!|
|05-22-2020 07:35 PM|
Ok, so THAT is what "Nutter Bypass" is for!
I have seen so many phrases and acronyms used on this site, and figured I would just bide my time, and all would become clear some day. Today, I see some clarity
Thanks for the info, and thought I might have my brother in ND see if he has an old mechanical 2 bbl Carter, or Rochester carb laying around the Ranch somewhere, and have him send it.
And I did look at some pics of the YF air cleaner assemblies, and think it might just work. I have nothing really on that left front wheel well in engine compartment, so plenty of room to mount a cold air housing! Also need to mount a radiator overflow bottle, but that would not be a problem, as there is lots of room under the hood of the beast with the I6.
Thanks again Dave
|05-21-2020 10:43 AM|
|DaveMueller||YF does have the smaller round opening (2-5/8"?). If your BBD has the big solenoid on the back, it needs to be connected to run the adjustment needles all the way in. Look up "Nutter Bypass", it's how to remove computer control from a BBD.|
|05-20-2020 12:28 PM|
That is good intel.....thanks
Helps to expand the search area a lot.
And that is OEM Carter carb on the YJ's with the round throat? My Weber is oval with that little crap filter, so might need to change out my carb to the Carter, for ease of getting the cool air cleaner setup! If so, will the Carter BBD still work ok without the 3 or so wiring connectors plugged in? Not sure the connectors are even still on the rig, but will look to make sure!
|05-19-2020 01:38 PM|
|John Strenk||Don't forget early YJ's also use the same air cleaner setup.|
|05-19-2020 01:02 PM|
Looking at pics of the Carter 2 bbl, and can fabricate a cool air duct w/filter box for the Weber.....but still open to the Carter carb if you all think better for mileage, power, etc.
Weber runs ok, just needs rebuild, as right now about 10 mpg...but rig was setting for 6 yrs and have not run it much yet until a little more work completed on it!
|05-19-2020 12:10 PM|
Now to find one, and hope it has the air cleaner assembly as well. Southern AZ is not kind when it comes to dust, and really would prefer to have the cooler clean air from the grill duct, than the hot dusty from engine compartment.
Not a DD (I work from home), or rock climber, etc, just light trails on occasional weekend and once in a while a drive to the parts store with my Grand daughter, while fixing this and that then test drive. But want to get parts a little at a time when I can, and nice to have the right parts for the job.
So any chance someone has a carb & maybe air cleaner I could pry from your grip to rebuild for my rig? I am in far east Metro Valley of PHX AZ by Superstition Mountains, and could pick up local or pay shipping?
|05-19-2020 07:43 AM|
Originally Posted by devildog80 View Post
Carter 2barrel BBD without the Stepper Motor.
I have a Carter BBD from 1980 Jeep on my 1984 model year. Bought it on eBay and was NOS OEM. They pop up every now and then.
|05-18-2020 10:55 PM|
the factory carb would have been a carter bbd. the mc2100/2150 was only stock on v8 engines. i understand what you are talking about the little weber air filters. i have one and change it every couple of months with a clean one. luckily i have thee of them from my old bug days. the other night i was actually looking at getting the adapter for the larger air cleaners used on a v8. instead of a round one i was looking at a 12" oval air filter. mocked it up with some cardboard. looks like it would fit with manual brakes.
|05-18-2020 09:07 PM|
|DaveMueller||I believe either a Carter BBD or an MC2100/MC2150 would have been stock in '81. Both are in the later shop manual but I never paid attention to which one was used based on engine and options.|
|05-18-2020 08:37 PM|
As we speak of the OEM air cleaner, I am asking what carb was OEM for 4.2 in 1981, No brake boost, 4 spd manual? Bought '81 CJ5 and has a Weber carb with one of those little crap filters and chrome clips to hold it on. If I can find a cold air system to fit it, carb not too bad and will rebuild unless I can replace Weber with more of an OEM type to have complete system right.
Oh, and no emissions stuff possible so would cap/plug any of that as charcoal canister not connected from PO x 1-2-4 (?) no telling for sure, just working with what I have now!
|05-14-2020 04:46 PM|
John, what material would you use that would stand up to an engine compartment environment?
I just scored the OEM air cleaner (for under $5000!) and am looking for the hardware. I have the bracket that goes on the rocker cover.
|05-01-2020 04:06 AM|
Originally Posted by John Strenk View Post
Averages out to 13/64".
|04-30-2020 04:34 AM|
|John Strenk||Thanks Keith, do you know the thickness at the edges.|
|04-29-2020 05:53 PM|
|keith460||Hope these pictures help.|
|This thread has more than 15 replies. Click here to review the whole thread.|