|Topic Review (Newest First)|
|12-05-2019 02:17 PM|
Added C gussets while doing my ball joints. Artec c gussets and synergy ball joints. Finishes off my dana 30 with artec truss with Johnny joints, chromoly shafts, lock right locker, 4.10 gears, LCA skids, one ton steering, Solid diff cover, and Bilstein shocks.
All back together
Not sure why my pictures got turned.
Sent from my SM-G975U using Tapatalk
|12-04-2019 04:36 PM|
I would double check that I am right about the NY thing.
But sadly pretty sure I am.
|12-04-2019 04:24 PM|
|Camaro45th||I am in NY[emoji24]. I have fixed a Ton of stuff on this thing. Itís my daily for work. I just did the spark plugs last week and it seemed to be running great. I was on my way to the auto parts store to get some coolant to try and flush my heater core again because my heat isnít very hot.|
|12-04-2019 04:17 PM|
I went through this a few years back with my '00 with CA Emissions.
Theoretically there are few things that could be causing this. Fuel trims, O2 sensors, exhaust leaks, and the like.
I spent a year checking every thing I could to be sure it was the cat.
Jeep seem to run fine all that time though.
I did not mind spending the money but wanted it to be fixed if I did.
Well turned out it was the cat.
Solved my P0432.
As long as you are not in CA or NY you want the cat for a CA Emissions '00 that is not registered in CA or NY.
It is different then the one you need to get if you are and somewhat cheaper.
I used a Walker one.
|12-04-2019 04:12 PM|
Originally Posted by Ralph77 View Post
|12-04-2019 04:12 PM|
|12-04-2019 03:56 PM|
Check engine light came back on, P0432. Catalytic Converter.
This thing is becoming a money pit.
Iím not sure if I should replace it or look for a new vehicle. I bought the car in September and have been putting money into it left and right. I canít seem to get 1 week of it not needing something.
|12-04-2019 12:12 PM|
|Jeep_XJ||Bondo... Had one spot of rust right corner above hatch that always bothered me so i finally got around to fixing it. Got a can of Dupli-Color Chrysler flame red coming from Amazon to finish the job.|
|12-01-2019 04:10 PM|
p.s. I'm partial to red Jeeps with black wheels.
|12-01-2019 02:14 PM|
|12-01-2019 01:03 PM|
|12-01-2019 12:03 PM|
New Tires Today & Inspected
Plates are due, So I had my inspection done, and decided on a new set of shoes. 31x10.5/R15......I'll change out to a different set of wheels after the holidays.
|11-30-2019 10:27 PM|
|shooptube||Black friday was very good this year. Purchased a cavfab alpha 3 link with skid plate and IRO full frame stiffeners. Definitely some much needed mods.|
|11-30-2019 04:27 PM|
|XJ-Buzz||Threw on a pair of 4.25" bump stops, but they might need to be shimmed....it just never ends! LOL|
|11-30-2019 05:21 AM|
Originally Posted by TheBoogieman View Post
Though body work is quite reasonable here in Panama so Im gonna turn over most of the exterior work to someone else.
Enviado desde mi SM-J600G mediante Tapatalk
|This thread has more than 15 replies. Click here to review the whole thread.|