|Topic Review (Newest First)|
|08-21-2017 06:27 PM|
2ash water temp gauge connector. You have the wrong sender in your head.
5:I can't see what you're taling about.
6:4WD light switch connector?
7:Goes to the heater control valve which you might not have. Plug it.
8:Not stock looking.
|08-20-2017 06:41 PM|
1987 4.0 Renix wiring help
I'm working on undoing all the PO's work. I have a few thinking in need to wrap up. Any help would be appreciated
Starting on the drivers side...
1.throttle body. Is the top hole is open. Should it be plugged in to anything or filled
2.back of the block near injectors 5 & 6
3. Back of the block near injector 6
4. Plug by the air box. Pretty sure this is for the e-fan... because its missing
5. Plug with TCM grounds
7. Purple plug coming out of the back of the heater box grommet
8. Red wire coming out of the harness by the battery