|Topic Review (Newest First)|
|01-20-2020 11:53 PM|
Here are some pics of the project on the TJ. The YJ specific parts will bring it closer to a CJ hopefully. If you have specific needs or find a solution, post up here, I'll keep an eye.
One thing I must mention, CJ;s have different frame widths that change at least once between '72 and (Mr. Adams year I think) '77. We found this out making gas tanks. LOL
Ok, this pic shows the top and front on a TJ, the YJ "front" is two files/pieces to eliminate the bend and need for a big press brake.
This pic shows the top only using stock bolt hole pattern. I did slot these holes but not enough to cover TJ to YJ, just enough to cover bent frames. Here will be the big issue for the CJ, what is the bolt pattern??
Here you can see the curve, the curve on the two piece is more usable as you can angle to your taste:
The shackles are 1" A36/mild plate
Note plate at back of shackle, it is right in line with the frame (of a TJ), we will need to address this too. I suppose it is ok to be out of line of frame, it just seemed the right spot to place.
Weld up inside before capping:
The weld between bottom and front plate was a little custom, I had to trim it a little and fold it into place (beat it to fit).
The bottom file posted has a relief cut in on driver side to clear the steering box, dunno if CJ's are going to need it, or perhaps a deeper relief.
Once fit, weld it up.......
I like the ground finish, so I spent some time grinding down the welds
I included the specs on the stinger hoop, any shape will work really, or no stinger at all.
The files for the light bar are made to fit around a Warn XD9000i, can be modified to fit any winch. The idea is you can fit random or single bar lights that adjust together by loosening side bolts and rotating whole bar
Anderson mount for jumper cables:
bulkhead mount for air:
Light var details:
Ready to roll
|01-17-2020 01:53 PM|
|John Strenk||Keep 'em coming!!|
|01-17-2020 11:12 AM|
|WSS||Here are some light bar and other mics mounts for the bumper project.|
|01-17-2020 11:09 AM|
|WSS||YJ specific parts, many of the TJ parts are the same. I modified the TJ front drawing to be in two pieces to avoid a press brake operation.|
|01-17-2020 11:05 AM|
I'm going to come back later and add pics. Just wanted to get the files here for you to use.
TJ Bumper parts
|01-07-2020 06:45 PM|
|cflock||Very nice! I think I could use that and modify it to my needs. I would appreciate if you would upload those files.|
|01-06-2020 01:14 AM|
Originally Posted by cflock View Post
I have a dxf file base for a TJ and have since modified it for a YJ, we are getting closer to a CJ. If you think you can use them, post up here and I will get them uploaded.
|01-05-2020 08:57 PM|
|cflock||Anyone have a file for a cj7 front and or rear bumper?|
|11-26-2019 05:37 PM|
Is there a file for a gear shift cover for a cj on here anywhere?
Sent from my SM-N960U using Tapatalk
|03-28-2019 07:46 AM|
|John Strenk||Wiring chart LM7|
|03-08-2019 04:56 AM|
|12-05-2018 07:47 AM|
|John Strenk||It's just hibernating for the winter.|
|12-04-2018 07:28 PM|
|lukester07||Why did this thread die|
|04-07-2017 07:33 PM|
CJ Grill Keychain fob
Gcode for 3D Printing CJ grill Keyfob
Let me know if the link doesn't work...
|01-23-2017 02:19 PM|
|TheHoneyBadger||I haven't really seen much in the 3d print files for CJs but I just purchased a printer... and I have a CJ8 that could use a lot of love .... so when I get the hang of it I'll add my 3d parts here too it's not gonna happen quickly as I haven't even tried to create anything yet and I'm still calibrating my printer... but soon|
|This thread has more than 15 replies. Click here to review the whole thread.|