JeepForum.com

JeepForum.com (https://www.jeepforum.com/forum/)
-   TJ Wrangler Technical Forum (https://www.jeepforum.com/forum/f9/)
-   -   Savvy Under Armor (https://www.jeepforum.com/forum/f9/savvy-under-armor-1046497/)

LuckRider 06-06-2010 11:20 PM

Sweet... I don't know anything about trademarks or copyrights or that sort of legal stuff.

Still no answer about the Rubi, case or pump?

lumpster 06-06-2010 11:22 PM

it is a catchy name!! look at the clothing company, they make a great product and their stuff sells like hot cakes!

dragginwagon406 06-06-2010 11:25 PM

Quote:

Originally Posted by Savvy (Post 9585409)
This version of Under Armor will work on the 97-02 just fine. The difference is the 97-02 and manuals will be getting extra clearance as we can move everything up further than the autos.

Email me and I'll put you on the list! We might decide that a few people who really want and need them can install one of these!

Already e-mailed.

For what it is worth, already have 1.25" BL and 1" MML(I realize it will need to be replaced) too.

mrblaine 06-06-2010 11:27 PM

Quote:

Originally Posted by LuckRider (Post 9585428)
Sweet... I don't know anything about trademarks or copyrights or that sort of legal stuff.

Still no answer about the Rubi, case or pump?

I'm ignoring you.

ocTJ 06-06-2010 11:27 PM

Yeah I saw blanes post about 97-02 but I assume that's the rubicons?

mrblaine 06-06-2010 11:32 PM

Quote:

Originally Posted by dragginwagon406 (Post 9585460)
Already e-mailed.

For what it is worth, already have 1.25" BL and 1" MML(I realize it will need to be replaced) too.

I'm going to strongly urge the early adopters to use all of our components to see how they work. That's the whole purpose of using early adopters so we can make any necessary changes to the full production runs.

If keeping some of your components that you've already purchased is important to you, please bow out of the early adopter program and wait until we get the production going that will have deletions available for folks with existing stuff they'd like to keep.

06WranglerX 06-06-2010 11:34 PM

E-mail sent.

jpfelix 06-06-2010 11:40 PM

and how much does that sexy beast weigh?

Savvy 06-07-2010 12:18 AM

Quote:

Originally Posted by jpfelix (Post 9585531)
and how much does that sexy beast weigh?

I don't know yet. Tomorrow we'll put the whole thing on the scale.

I'm guessing 50 lbs?

Tinga 06-07-2010 12:25 AM

Maybe by the time this gets put into full production and the kinks are out I might have enough $$$ to get one LOL

RaggedOleMan 06-07-2010 12:59 AM

Quote:

Originally Posted by mrblaine (Post 9585492)
I'm going to strongly urge the early adopters to use all of our components to see how they work. That's the whole purpose of using early adopters so we can make any necessary changes to the full production runs.

If keeping some of your components that you've already purchased is important to you, please bow out of the early adopter program and wait until we get the production going that will have deletions available for folks with existing stuff they'd like to keep.

PM sent to Gerald. I'm willing to remove and peddle my 1" M.O.R.E. MML and 1" Currie BL. Let me know...

QuickSilverCon 06-07-2010 01:06 AM

When you need a Rubi tester, I'll gladly help.

mrblaine 06-07-2010 01:09 AM

Quote:

Originally Posted by QuickSilverCon (Post 9585772)
When you need a Rubi tester, I'll gladly help.

And when we need Rubi testers, you know that by the thread we start asking for them. :rofl:

mrblaine 06-07-2010 01:12 AM

Quote:

Originally Posted by jpfelix (Post 9585531)
and how much does that sexy beast weigh?

We've not weighed any of it yet. I'm going to guess that with the motor mount lift, body lift, skid, wings, crossmembers and all the fasteners, it's going to be between 50 and 60 lbs.

mrblaine 06-07-2010 01:15 AM

Quote:

Originally Posted by Tinga (Post 9585687)
Maybe by the time this gets put into full production and the kinks are out I might have enough $$$ to get one LOL

The reference to kinks is my way of weeding out the non committed. I'm 99% confident that this will fit perfectly. ;)


The time now is 02:53 AM.

Powered by vBulletin Version 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.