Jeep Enthusiast Forums banner

3 wire connector under glove box

555 views 4 replies 5 participants last post by  John Strenk 
#1 ·
Can anyone tell me what the 3 wire electrical connector under the glove box is for? It has a tan wire, a brown wire, and a brown with white tracer wire. They head towards the driver side and enter a taped bundle about mid dash. I have been therapeutically purging her of unnecessary wires, in hopes of creating a completely wireless system :grin2::wink2:
 
#5 ·
Can anyone tell me what the 3 wire electrical connector under the glove box is for? It has a tan wire, a brown wire, and a brown with white tracer wire. They head towards the driver side and enter a taped bundle about mid dash. I have been therapeutically purging her of unnecessary wires, in hopes of creating a completely wireless system
It's for controlling the speed of the blower motor for the heater.
There are 3 resistors in the fresh air duct to keep the resistors cool when operating.

If you want wireless better find an old diesel with a hand crank start....
Carry a flashlight or an acetylene headlights,
remove your windshield, no windshield no wipers needed.
Mechanical gauges.

Learn hand signals
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top