Well, i finally made the Jeep Leap, into a '90 wrangler, w 4.2L 5spd. Body lifted 3-4", leans to the passenger side a bit. Needs a better carb(this one runs, but it isnt properly hooked up) i have the dread frame rot just behind the driver rear sping front mount. The hard doors are here but the window frame is pretty bad at the door. It has some 33x12.5 meats and plenty of chrome on a black body. Im new to this, so and help/advice is greatly appreciated. Wondering how to go about fixing the rot on the frame first, and the tilted body as well. TIA.