JeepForum.com

JeepForum.com (https://www.jeepforum.com/forum/)
-   Paint and Body (https://www.jeepforum.com/forum/f260/)
-   -   Has anyone used Prismatic Powders to color match Sting-Gray paint?? (https://www.jeepforum.com/forum/f260/has-anyone-used-prismatic-powders-color-match-sting-gray-paint-4444493/)

Leongorani 10-10-2021 09:30 PM

Has anyone used Prismatic Powders to color match Sting-Gray paint??
 
I wanted to powder coat some pieces of metal for a bumper, as close as possible to the Sting-Gray color of my Jeep. I went to a powder coat shop and they told me to either look online on Prismatic Powders, and to look under the powder coat color section to see if I could find a close match, or I could look through their samples they had in shop. Some samples were close but not exact.
But I wanted to ask if anyone has ever found a match on that site, for the Sting-Gray Jeep color and how it looks compared to the OEM color.

Here’s the site they gave me:

https://www.prismaticpowders.com/sho...lor=pris_grey#

I know you cannot really color match powder coating but if anyone has suggestions please let me know I would greatly appreciate it. I may use this color to powder coat a full bumper in the future too.

222Doc 10-11-2021 12:08 PM

issue on line with color charts will make this near impossible. You need to put the chip next to your jeep. Unless the shop can tint that material you are kind a stuck with what is close.


The time now is 08:54 PM.

Powered by vBulletin Version 3.8.8
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.