T-176

From JeepForum.com Community Jeep Wiki

All information listed came from an original 1982 SERVICE SPECIFICATIONS MANUAL for CJ-5, CJ-7, Scrambler, Cherokee, Wagoneer and Truck.

‎

Lubrication: Inspect and correct fill level every 5,000 miles. The fluid level fill plug is located on the right side of the transmission case. The correct fill level is to the edge of the fill plug hole.

CAUTION: Do not use any type of anit-friction additive or lubricants used in limited slip axles.

Lubricant Capacity and End Play Tolerances - Model T-176:

End Play Tolerances:

Countershaft Gear to Case...0.004 to 0.018 inch (0.10 to 0.45mm)

Reverse Idler Gear to Case...0.004 to 0.018 inch (0.10 to 0.45mm)

Mainshaft Gear Train...0.004 to 0.018 inch (0.10 to 0.45mm)

Lubricant Capacity...3.5 pints (1.7 liters)

Lubricant Type...SAE 85W-90, API GL5

Gear Ratios:

First (six cylinder): 3.82:1

First (eight cylinder): 3.52:1

Second (six cylinder): 2.29:1

Second (eight cylinder): 2.27:1

Third (six and eight cylinder): 1.46:1

Fourth: (six and eight cylinders): 1.00:1

Reverse (six cylinder): 3.82:1

Reverse (eight cylinder): 3.52:1

Torque Specifications Model T-176, listed using USA Foot Pounds / (Metric Newton Meters):

Back Up Lamp Switch: 15 / (20)

Drain and Fill Plugs: 15 / (20)

Front Bearing Cap Bolt: 13 / (18)

Shift Housing-to-Transmission Case Bolts: 13 / (18)

Transmission Cover Bolt: 7 / (10)

Support Plate Bolts: 18 / (24)

All torque values given in foot-pounds and (newton meters) with dry fits unless otherwise specified.