Before i bought my YJ i really wanted a
scrambler. Then i found out how
expensive they are. After seeing a few
really nice lifted TJ unlimiteds, I
decided that it would be sweet to
stretch my jeep t
Seems like most people want 35’s
for street or trail. I wrote this as a
reference guide on what you’ll
need to do it right. Yes, you can do it
half way, or many other variations to
these s
Well, after reading a few other threads
I have become more interested in budget
junkyard upgrades. What I mean when I
say "budget junkyard upgrades" are
upgrades like installing a ZJ tie rod
into a TJ
OK, I didn't know exactly where to put
this, but my Jeep Truck has a Cj-2
engine/drivetrain (except the 1-ton rear
axle). So Moderators, move it if you
don't think it belongs.
On Labor Day 2006 I
Purpose of this thread:
To show what can be done on a very
limited budget. My wife (of over a year
now) and I combined do not make very
much (we have no kids--she works full
time, I am a mecha
Here are some pictures of what
I have done so far. As you
can see, I have plenty to keep
me busy this winter.
Tub is ready for removal
http://lh5.ggpht.com/_yKyTtWxG
e6g/STMsyC7x8pI/AAAAAAAAABk/Me
dSgFELGDo/s640/SANY1130.JPG
Cut out the rusted section,
not primered, and weld in
replacement.
http://lh5.ggpht.com/_yKyTtWxG
e6g/STMs25AiIRI/AAAAAAAAAB4/KW
ReQy3dPxg/s640/SANY1132.JPG
This side is too unsound to
repair so it will be
completely replaced.
http://lh3.g...
I have a 1979 CJ7 jeep and I
can't seem to find a diagram
for my 4wheel drive vacuum
lines also I just went to
change my sending unit on my
gas tank and there was a
breather hose inside the tank
that has rotted the tank is in
great shape but I can't seem
to figure out how to change
the hose or why the even put a
rubber hose in a gas tank in
the first place so if any one
has any ideas they would
greatly help...
Brought the new project, 1985
Yellow CJ-7, home last night.
I should say that I brought
all the parts home. I got
this Jeep from my brother who
started to restore it but
stopped about 10% into it. He
bought many new parts, mostly
cosmetic, nothing to help in
the repair of sheet metal. No
pictures yet as I am not
really a picture taker but I
will try for the sake of
documentation.
Things done today - Tub
repair
1. Repaired body mount that
was rusted in two. Preparing
the replace...
Last summer I felt a ton of heat coming
off the inside of my hard top so I came
up with this fast cheap fix.. In Florida
we have a ton of heat and sunshine one
day I all most burnt my hand on the insi...
Like many of you out there with the 4.0
I6, high-under hood tempuratures are a
factor in the overheating of your
engine, resulting to shortened engine
life and frustration with your Jeep!
This problem...
i saw a few months ago where somebody
was wanting to use one of these but was
not sure on how to set it up. i have
since installed one on my TJ and would
like to share how to do this. if you
have a ge...
York On-board air
When looking into adding an on-board air
set up to your Jeep there are a few
options, the best being a York A/C pump
used as an air compressor. The reason
for this is because they ...
Jeep, Wrangler, Cherokee and Grand Cherokee are copyrighted and trademarked to the Jeep/Chrysler Corporation
JeepForum is not in any way associated with Jeep or the Chrysler Corp.
