Got the front end done for the most part. Still have to reinstall the brake lines on the extended brackets and put in my dual stabilizers. Should finish up tomorrow with it all though! :2thumbsup: Update on pics
Finished putting my Lift and tires on!!! Absolutely love the kit, it rides a little rough but I expected that. Drives perfect though, absolutely no problems out of the steering! Here are some pics
Another shot of the front end
Jeep on the lift, bout to start on the rear end
Proof that I did do the work, lol
My buddy helpin me work
Finally done!
Some quick poser shots :2thumbsup:
Yes, that is a mall cop behind my jeep telling me that i need to stop. I told him i was just trying to park. lol
Me by some stockers
All said and done I got 4 inches of lift out of the front and 3 inches out of the rear. Measure 21"from center of wheel to fender at start all the way around and 25" in the front and 24" in the rear in the end. The tires with full load and pumped up to 35 psi sit at 34". Overall I love it and I love driving it. :cheers2:
Part of the rough ride may be your tire inflation. 35 seems REALLY high to me. I'll bet you need about 27 to 28psi. Maybe less. Jeep looks fantastic. Well done.
Pics in general dont do it justice, :2thumbsup: but unfortunately i lost my digital camera in the move and the phone suits me just fine so im not getting another one.
Hey, looks great. I was thinking something looked missing, then it hit me. Mud! It's time to move outta those parking lots and quit flexin on the curb (the cops would probably appreciate that too) and put all that beautiful gear to work. :2thumbsup:
Guessing the next project will be bumpers and a winch.
good lookin jheep!!!
Who makes the rims? Not for me but a friend who has been looking for something like those.... Who'd u get them from? What did they run?
I am running 35's on 17" rims. Got the Pro Comp Xtremes for my rig. I run at 28 psi cold. which equates to 30ish psi when warm. The pressure ur running will make it a rough ride. Try putting it lower and I bet it will soften up some. Should feel a lot better over bumps.
Also depending on how much the new wheels weigh I would recommend a swingate. My Wild Boar bumper doest have a swingate option so I just installed the OrFab NonCan carrier and its awesome!!! Love it!
Im available pretty much every friday and sat. this sat me a few other ppl are going to Rausch creek, you should come up and go with us. i wanna go friday but cant find anyone else who is.
I didnt add pics yet. i got it on after dark and didnt feel like dealing with it. ill get some tomorrow. it just bolts on right behind the muffler where those 4 holes are at. It should fit with an aftermarket bumper. i got it from rough country at roughcountry.com just go there and check it out. its under 100 bucks so its a cheap mod.
I got an aftermarket hitch, same as yours, I'm sure, and then had to get a new rear bumper (lady hit me).
FYI: There are VERY FEW aftermarket rear bumpers that don't have their own unrated hitch built in, or go down too far to use the receiver. :cheers2:
and hey MilMan, did you find Ali Baba's gold or somethin'? You must have some money saved up!!! (read as Jeep envy!)
I argued with my tire shop (they know Jeeps) about using only 27 PSI. (That's where they set them). So decided to prove them wrong with the chalk test. I was wrong they were right. Your Jeep is lighter than most vehicles and the load rating on that tire confused is probably in line with a much heavier vehicle. Mine rides great at 27 PSI and it's a 4 door which is a little heavier.
Looking great! I think those wheels look great on the Jeep :thumbsup: And I will really lower the pressure in the tires you will notice alot better drive...
I had my oil changed awhile back (yes I know I did not do it myself) and the tech came and told me it was done and that all 5 (spare included) of my tires were low so they added some air, I asked him what they were all at he said all were at 28 lbs so I just stared at him until he realized that is what they were supposed to be at lol :2thumbsup:
Lol, well i did have some money saved up. but i also just reenlisted and got a pretty nice little bonus. and i dont plan on getting a new rear bumper so im fine with it not working with them. (not any time soon anyways). Thanks for all the comments guys, i really appreciate it. Lets go wheeling some time if your in the area. we have a group going to rousch creek on the 16th if anybody hasnt caught that thread yet just look up 1-16-2010 rausch and you should find it, if not just pm me. ima try and get some pics up of the stuff i didnt put on here. right now most my time off is in the night so im not able to take good pics.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Enthusiast Forums
18.5M posts
726.7K members
Since 2000
A forum community dedicated to all jeep owners and enthusiasts. Come join the discussion about performance, engine swaps, modifications, classifieds, troubleshooting, maintenance, and more!