Jeep Enthusiast Forums banner

Total build with pics!

24K views 161 replies 44 participants last post by  MilitaryJK4455 
#1 · (Edited)
RC 4" control arm lift:859.95
RC 87349: 129.95
Pro comp susp boot: 20.85
35x12.50 KM2 (5): 1394.95
17x9 XD spys (5): 989.75
wheel lock nuts(5):19.95
AEV Procal:149.99

I also put on the Rough country armor for my front and rear pumpkin and the "tow package" on the rear.

:2thumbsup: Nowhere near done but its a start.

From the side

A closer look, only lower control arms are on

Still needs to go on

Also needs to go on

35" BFG KM2's

17" XD spys

My AEV Procal and Jack thingy came in today too! This thing is really small!

:cheers:
 
See less See more
8
#30 ·
i would pull those wheels off right now!!!! i have the same ones, and after just one winter, ALL the clear coat covering the machined parts came off, and the wheels started pitting. and i even cleaned them 3 times a week. trust me, they look great but KMC DOESN'T stand behind their stuff, and won't replace wheels that ever touched salt. just warning you, cuz when summer comes, you are going to be really bummed out:(
 
#32 ·
didn't know if you had the stockers yet, it would look funny, but the 700 you spent on rims wouldn't go down the drain
 
#35 ·
hey just thought i'd shoot ya the warning, great looking jeep bud, like it alot. i could really see that front grille being painted gun metal.... :drool::drool::drool::drool:
 
#46 ·
Hey man, your jeep looks awesome, and I like the idea of a gunmetal grill, but has anyone seen this done on a TJ...I think that a black grill on my red jeep might be a good look with everything else being red/black combo...what do you think? don't mean to hijack!
 
#53 ·
1 - good looking jeep!

2 - bleeing the brakes is easy - the best way to do it is locate the bleeder valve on the back of each caliper. Have a friend pump the brakes (with the key off) and hold the pedal down. while he's doing that, crack the valve. repeat until you get a steady stream (which means all the air is out of the line). Then do the same to the remaining 3 calipers. hope that helps! :cheers2:
 
#56 ·
now just tint your hardtop and it would look bad a**.
 
#59 ·
Well, I finally pulled the plug on painting the grill black. Im doing it now so here are some pics in process... The last one is to show texture. I used two cans of duplicolor bed liner and 2 clear coats of duplicolor also.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top