Jeep Enthusiast Forums banner

Mudbog at the farm on the 24th

1K views 10 replies 5 participants last post by  mtndewrules 
#1 ·
I am holding a 4x4 mudbog at my family farm in Junction City on Jan. 24th. Some of you have been there or have seen the pictures from it. You are invited to come and watch or if you have a 4x4 you want to try it out you more then welcome to play. This is a non-competition event. It is just for fun. We have 2 main mud runs that start out pretty shallow and end in some deep mud. They require 38" tires to do the whole run. There are easy out before they get to deep. I also have a main play area that has about 1ft of mud that you can do donuts in. There is also a few other small holes to play in. You don't have to worry about getting stuck we have plenty of tow rigs and a tractor if it gets to bad. I will have bonfire going to keep you warm. If you want to just come to watch you will have to either walk down from the house. (you will need boots or some shoes you don't mind getting muddy/wet) or ride down with one of the trucks. There is plenty of dry parking up at the house. Only 4wd's will be allowed past the gate down to the field. If your interested in coming out, just let me know. I'll send you directions. This will be on Saturday Jan. 24th starting around 9am till dark. If you have any other question just let me know.
 
#4 ·
Yea im down for some wheelin action. how much of the course could i run with my new 33'' KM2's. plus Jeeps my DD so i dont wanna get into anything gnarly where i could break something
 
#5 ·
I run 32's on my DD Jeep. Most of the place is make able with stock tires. the 2 runs start fairly shallow and get deeper. I've added a couple easy outs before they get to deep. Also the main play area is just 1ft of slop to cut cookies in. Let me know if you want to come your more then welcome.
 
#6 ·
whats the address and ill let you know for sure if ill be able to show. its saturday right?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top