Jeep Enthusiast Forums banner

Part No for Patriot 16'' alloy rims

2K views 6 replies 2 participants last post by  Gramps 
#1 ·
Does anyone know part number for Patriot 16'' alloy rims?

And another question:
Do 15'' Caliber rims fit under Compass?

:confused:
 
#3 ·
..but the Patriot 16's are steel not alloy. Still want a part #?
Yes :)

Btw, would XJ rims fit under Compass?
I'm looking for something, that's (almoust) original, but 16'', not 17''. To make my choice of tires wider...
 
#4 ·
This is a listing for the tire and wheel package - 0YX87S4AAA. I'll need to call the dealer tomorrow to get a break down for the wheel by itself.

The MK's have a 5 on 4.5" (114mm) hole pattern and 39mm (1.535") of offset on the 16X6.5 rims which = approx 5.25" Backspacing. See chart and more info here: https://www.rsracing.com/tech-wheel.html

The XJ also has a 5 on 4.5 hole pattern but the backspacing depends on which wheels you find.
 
#6 ·
The 403 code has to do with your browser not letting you link outside of the main page. If you edit the address in your browser back to the home page and try that you can then click on the links internally to get to the right page. Here's a better explanation but you may get the same error code. http://www.checkupdown.com/status/E403.html

Try this one https://www.rsracing.com/ then go down to Technical Information and then to Wheel Tech.

No, I'm not sure the part number isn't just for the wheel. The notes say WDJ (16x6.5 Styled Steel Wheel) + X88 (Tire and Wheel Parts Module). I need to make a call.
 
#7 ·
Well, I just called the dealer and got the run around that they needed the VIN number to find the part number. I'll go back in to try and find a VIN code for a Patriot with 16" wheels and try and go from there.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top