Hey guys,
I've been slowly cleaning and replacing parts on both the intake and exhaust manifolds. In order to take the intake out I had to pull the fuel rail. At the time I wasn't worried about it and figured I'd pick up an o-ring kit at the local parts store. Problem is when I went to order them, the after market kit comes with 4 o-rings per injector.. two more than I need and they are not labeled top vs bottom. So I gave the dealer a call and they say they don't sell them anymore AND they don't have any part numbers for the kit either. I'm not looking to replace the injectors or anything fancy, at least not right now, I'm just looking to put it back together the way it came apart.
Has anyone ran into this problem or have part numbers for a kit? According to Mr. Haynes Manual the O-Rings for the top and bottom of the injector are not interchangeable.
I've been slowly cleaning and replacing parts on both the intake and exhaust manifolds. In order to take the intake out I had to pull the fuel rail. At the time I wasn't worried about it and figured I'd pick up an o-ring kit at the local parts store. Problem is when I went to order them, the after market kit comes with 4 o-rings per injector.. two more than I need and they are not labeled top vs bottom. So I gave the dealer a call and they say they don't sell them anymore AND they don't have any part numbers for the kit either. I'm not looking to replace the injectors or anything fancy, at least not right now, I'm just looking to put it back together the way it came apart.
Has anyone ran into this problem or have part numbers for a kit? According to Mr. Haynes Manual the O-Rings for the top and bottom of the injector are not interchangeable.