Jeep Enthusiast Forums banner

Winch and bumper

1K views 8 replies 5 participants last post by  Mike934 
#1 ·
I'm a bit in love with my stock jeep but I'd like a winch. Anyone know a good and possibly cheap bumper and winch setup that resembles the stock bumper? I don't want to hide the winch I don't mind showing that off but I don't want a huge bumper I just want a simple bumper that can hold a winch.
 
#2 ·
There are hidden winches available that will mount behind the stock bumper. I don't know exactly where you should look, but I know Charley3 does. Send him a PM, and tell him I sent you.

Sent from my phone
 
#5 ·
I built a box for my winch, just big enough to mount it in and then I cut my stock bumper into three pieces and used the two outer ends and mounted them back with the stock hardware. It isn't real strong (as we know our stock XJ bumpers aren't real strong) but it looks better than just the box mounted on the front. I have plans on finishing the bumper build in the future as I can free up funds to buy more steel, but for now, it looks fairly good (to me anyway).
It cost me maybe $25 for enough steel to make the box and the frame rail tie-in's. Oh, and maybe another $20 or so for the grade 8 bolts.
 
#9 ·
Tucked & trimmed winch build. Google that. I prefer it over the detours option and am actually going to email detourst o see if they wouldn't mind building it.
It places the winch behind your oem bumper, no lose of approach angle, nor do you have to worry about cooling since there will be no winch blocking the radiator.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top