Jeep Enthusiast Forums banner

Air bagging Comanche for LOW! Can it be done?

10K views 18 replies 13 participants last post by  chris87xj 
#1 ·
I just picked up my first jeep Comanche so stoked.


Was just wondering if air bagging a jeep is possible ?
Never owned a truck only Vw's. so not to smart with trucks
 
#9 ·
If you have ever air bagged a vehicle before then you should be able to figure it out.

 
#10 ·
It Wouldn't be too hard, it'd be a lot easier with two wheel drive so you dont have to worry about the front axle and clearing everything once you lower the truck. the rear would be easy to lower you'd just have to cut into the bed.
 
#15 ·
built a frame for it out of 2x3 and did a toyota front clip so it has control arms up from lays body on 18's had to heavily modify the upper and lower control arms and had to triangulate the lower arms so i could get rid of the radious arms and did toyota drop spindles with isuzu hubs and rotors so i made it 6 lug and put a isuzu rear in it
 

Attachments

#16 ·
If you know VW's, why not a VW truck?

And really.... other than showing these off at a show, why would you do that to the front. Serious, im very curious if it came out of a real need.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top