Jeep Enthusiast Forums banner

Just another wj and a lot of free time

8K views 41 replies 6 participants last post by  Mjaime_007 
#1 ·
This is my first jeep ever and so far I'm pretty happy with it had it for about 6 months now and the more ideas I see the more I want to do to it





first thing i hd to do was get the engine rebuilt on it











 

Attachments

See less See more
13
#2 ·
Side rails and brush guard

Added rock rails removable steps, front brush guard , hig Hellas 700 and 500 black magic, golight Stryker, dual stabilizer, wheel spacers 2"









how bright are my lights u ask ?
only head lights


all of my roof lights lights



did i mention that wheeling my rear sway bar mount on the frame rotted away ? well a few months after i fix it the other side went

broken








i didnt see a good place to weld at the time and didnt and still dont have a good enough welder so i put a very thick c channel inside the frame that is very long and welded nuts to it and a think l braket on the outside secure with bolts i performed same surgery on both sides and i been wheeling with it hard and it still holding up strong



 

Attachments

#8 ·
i forgot to take pictures but i preaty much started with an idea of putting a front hitch so in the future i would have a hitch winch but insted i ended using the hitch as brakets and c clamp some steel beams and started cutting til i came up with something i like new project for this week is an actual hidden front hitch mount pictures to come later

before cutting the frame out for the hidden winch


after cutting it





 

Attachments

#10 ·
il look for some more, today i started to add struts to the rear and i intall the new gears in rear 4.56
 

Attachments

#25 ·
completed snorkle i bought the fiber glass kit from another jeep owner that he bought from a friend so no way to trace where to buy this all i know is that its the same style snorkel as the ones use in europe for the diesel wj i believe this is the web site where to order them i think http://www.rocasilva.com/snorkel-conceptscar/spip.php?rubrique1

well here is the pictures
i always to take more pictures but im getting better at it

had to take the fender off to cut the hole for the house that goes to the inside part of the snorkel to the air box









next i plug the hole on the air box with the front bumper foam i still had laying around and i put water proof appoxy all over it every heal crack and all over the foam also cut a side hole on the inside of the air box i purchase a push tight pvc adapter that is use for a toilet and cut it up to fit the hole and seal it and screw it in tight for the air hose to connect to













here is the air box install and connected





completed snorkel :)



it got dark out so i turn my side lights on to help e clean up

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top